Newbie from ID

[Alicedad98]

Hey guys,

I'm a newbie from Nampa. I just put in a tremec 5 speed into my 70 Challenger. I decided to go with a Hydraulic clutch/ Throwout bearing. Very tight space for me by the clutch pedal. I've been looking for a nice hydraulic clutch conversion to use my existing pedal. I don't want to completely re work the fire wall? Has anyone done this and if so, did you make or buy a bracket? I can weld and FAB. so if you can help, I can probably make it.

Help and ideas would be very much appreciated. Even a picture or two!!

Many Thanks

 

[Rapidfire]

Welcome from Nebraska. Nice to have you with us.

 

[Mopar Nut]

 

[Chryco Psycho]

Welcome !
I don't have a good suggestion for the hyd master system , I built my own but I really was not happy with the result .

 

[mrmopar340]

Welcome from Virginia.

 

[DetMatt1]

Welcome to the site from the Motor City!

 

[rklein71]

My hydraulic clutch setup from Silver Sport Transmissions bolted in with no modifications to the floor board. Oops, firewall.

 

[moparlee]

Welcome to the site from Michigan! Post up some pictures of your Challenger.

 

[MOPARMITCH]

Welcome to the Madness !!!

 

[Juan Veldez]

Hey neighbor, welcome.

 

[Kansan]

Welcome from Central Arkansas....

 

[Kansan]

@fasjac ...did you use a hydraulic clutch on yours?

 

[fasjac]

@fasjac ...did you use a hydraulic clutch on yours?

I did not. Still like some clutch pedal feel.

 

[fasjac]

Welcome to the site from Arkansas!

 

[Xcudame]

Welcome to FEBO from the desert! Please post some pictures! You have a great neighbor in @Juan Veldez! Please listen what @Chryco Psycho is telling you! You might be headed down a rabbit hole. I suggest contacting Brewer's and asking them for suggestions. They know manual transmissions!

Home - Mopar A833 4-Speed Transmission & Component Specialists

www.brewersperformance.com

 

[Challenger RTA]

Welcome to FEBO. Lets see the 70 Challenger you have in your clutches.