oddio
Member
Does anyone know a part number or were to get Rear end links for a 73 challenger? All the one that I find seem to be for the front sway bar not the rear. ANy suggestions? Thanks.
Rear End Links for Challenger
- Thread starter oddio
- Start date
ramenth
Well-Known Member
Have you tried PST or Firm Feel? They aren't listed seperately on the websites, that I could find, but might be able to call and find out. My parts sources are coming blank.
I have built these before with bushings for another car, in polyurethane, using washers and all thread.
I have built these before with bushings for another car, in polyurethane, using washers and all thread.
oddio
Member
Thanks, I looked all over their websites as well, but couldn't find anything either. Guess I will have to give them a call.
I have the original end links was thinking of maybe using those with some poly bushings that fit and call it day.
thanks for your help.
I have the original end links was thinking of maybe using those with some poly bushings that fit and call it day.
thanks for your help.
ramenth
Well-Known Member
I called my commercial guys at Napa and Advance, hoping there was a listing for Moog, but no such luck. Both are pulling blanks for the rear. Coming up gold on the front, no rears.
The fact that Firm Feel and PST are offering complete kits means they have a source somewhere, it's just a matter of whether they'll sell 'em seperately.
The fact that Firm Feel and PST are offering complete kits means they have a source somewhere, it's just a matter of whether they'll sell 'em seperately.
The rears are a different animal than the fronts which I'm sure you already know. The fronts use a long bolt with a spacer. The rears are a shaft with threads on each end. There is a build in step on each end so a spacer isn't used. These shafts are available new but are spendy. I can do some searching and try to find them for you.
I have one good one but the other broke during disassembly. I hope to find one used one. I think the front bushings will fit on the rear shafts.
I have one good one but the other broke during disassembly. I hope to find one used one. I think the front bushings will fit on the rear shafts.
Here you go...first place I checked.
http://www.billrolikenterprises.com/proddetail.asp?prod=2535188-P
http://www.billrolikenterprises.com/proddetail.asp?prod=2535188-P
oddio
Member
Excellent! Thanks.
I actually have the links themselves, i just need bushings. I am going to check the fronts bushings to see how they fit on the rear link.
I actually have the links themselves, i just need bushings. I am going to check the fronts bushings to see how they fit on the rear link.
GranCuda70
Well-Known Member
Thanks for the link I will order tomorrow I needed a set of end links as well, .. 50 bucks and they are concourse.
Similar threads
