• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

shifter cable for 73 challenger

Status
Not open for further replies.

Ole Yeller 73

New Member
Joined
Aug 9, 2009
Messages
1
Reaction score
0
Location
CT
Rating - 0%
0   0   0
Contact seller
Im looking for a stock shifter cable for a friend with a 73 Challenger, auto , I beleive its a 727 trans. Anybody know where I can get one?

Thanks
 
Slap Sticks are linkage and not cable aren't they? toolman
 
Yep, they use a linkage system. There is a rod that runs from the shifter to a pivot shaft that goes down throught the floor. Then there is a second rod that runs from the pivot shaft to the trans.

A 73 Challenger could have had a 727 or a 904 depending on what engine it had. I would assume that the linkage for the two trans would be a little different. At least the one under the car anyway. I don't know that for sure but that is what I'm guessing.

The pivot shaft rides in a bracket/bushing that is attached to the trans. Make sure you have that part too.
 
Status
Not open for further replies.
Back
Top