• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Tires size recommedation

Cazbah362

Well-Known Member
Joined
Feb 3, 2012
Messages
218
Reaction score
28
OK folks, I have a 1970 Cuda and a set of cop car wheels. What is the widest tire size I can place on these with this car?

What tire combination size is recommended on this?
 
OK - No response, would assume this is dead horse question, so going to post a few thoughts of my own:

Cop car wheels with:

(Rear) 255/60/15: http://www.summitracing.com/parts/mtt-6028/overview/
(Front) 235/60/15: http://www.summitracing.com/parts/mtt-90000000181/overview/

I liked the thought of 275/60/15's, however reading through threads, see they are tight if not borderline with a stock setup.

And selected the MT's due to being lower cost
I have 225/60 /15 they just scrap on the front inner guard at full lock Rear 245/60/15 BFG mate has 275/60/15 but has spring relocator kit just clear springs & inner guard.
 
Thanks AUSTA! How are your 245's is there more room? and what wheels are you running?
 
Thanks AUSTA! How are your 245's is there more room? and what wheels are you running?
I have a set of 255/60/15 on my TA but the rear sits a bit higher than the A66 even though they both have the TA 48 springs all are Rallye front 7" rear 8" standard 4.5 stud pattern from Summit
The 245's are a healthy 1 1/4 from the inner guard & 1 1/2 from the spring pack .
see pic with 22" 295 they aren't bolted on off my Audi Q7 playing around to see what tyres would fit dodge23.jpg

dodge23.jpg
 
AUSTA - Very cool, thank you for the insight, I may just stay with 245's to be safe.

BTW nice looking car
 
On my '73, With MP replacement XHD 440/HEMI springs at or near stock ride height at the front. I have 245/60/15's on all 4 corners.
 
Back
Top