• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

SOLD tti Headers

Status
Not open for further replies.

Clownbaby

Member
Rating - 0%
0   0   0
Joined
Dec 13, 2012
Messages
23
Reaction score
2
Location
Sacramento, Ca
Contact seller
Up for sale is a LIKE NEW set of Headers $750

tti are known for being the highest quality Mopar headers made!!!

This set sells for over $1000 new, plus tax if you live in California, plus shipping (which has exploded since Covid). These headers can cost up to $1250 delivered to your door. Not to mention reduced current inventory levels. Most performance products are either low on stock or out; with replenishment dates of several months to a year.

FYI: Do not use these to break in an engine. Most header companies will warn against it; can discolor the finish from the excessive heat. Use an

This set was on a 71 Challenger I bought. They were soft mounted to the head, for appearance sake, and look like they have never been on a running engine. They have a few little scuffs and scratches from being moved once or twice.

Manufacture: tti Exhaust
Model # - 383 178
Application - 383 Big Block Mopar
Finish - Ceramic
Options - Interior thermal barrier

1-7/8" FULL-LENGTH HEADERS, 3.0" collectors HEADER NO. 383-178
• Applications: 66-74 & 75-76 B-body and 70-74 E-body

• B-Engines: 383, 400

• Cylinder Heads: OEM or Equivalent - Factory 915, 906, 452, Bulldog, Edelbrock E-street, Edelbrock Performer RPM, Indy-EZ, Stage 5, Trick Flow, 440-

1-7/8" O.D. tubes with 3" 3-bolt collectors

Recommended for 400-600 horsepower range

Above the steering center link design offers maximum header to ground clearance

One piece header tubes / No slip tubes

Constructed of 16 gauge mild steel tubing

Mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

3/8" thick laser-cut header flanges contoured for a leak free fit

3/8" thick laser-cut 3-bolt collector flanges

Most tti Headers require a mini starter. You can visit their website for all details.

For local sale only. Headers are a bear to box, and cost a fortune to ship.

DSCN3516.JPG


DSCN3518.JPG


DSCN3519.JPG


DSCN3520.JPG


DSCN3521.JPG


DSCN3523.JPG


DSCN3527.JPG


DSCN3528.JPG


DSCN3529.JPG
 

Clownbaby

Member
Rating - 0%
0   0   0
Joined
Dec 13, 2012
Messages
23
Reaction score
2
Location
Sacramento, Ca
Item Is Still For Sale.
Up for sale is a LIKE NEW set of Headers $750

tti are known for being the highest quality Mopar headers made!!!

This set sells for over $1000 new, plus tax if you live in California, plus shipping (which has exploded since Covid). These headers can cost up to $1250 delivered to your door. Not to mention reduced current inventory levels. Most performance products are either low on stock or out; with replenishment dates of several months to a year.

FYI: Do not use these to break in an engine. Most header companies will warn against it; can discolor the finish from the excessive heat. Use an

This set was on a 71 Challenger I bought. They were soft mounted to the head, for appearance sake, and look like they have never been on a running engine. They have a few little scuffs and scratches from being moved once or twice.

Manufacture: tti Exhaust
Model # - 383 178
Application - 383 Big Block Mopar
Finish - Ceramic
Options - Interior thermal barrier

1-7/8" FULL-LENGTH HEADERS, 3.0" collectors HEADER NO. 383-178
• Applications: 66-74 & 75-76 B-body and 70-74 E-body

• B-Engines: 383, 400

• Cylinder Heads: OEM or Equivalent - Factory 915, 906, 452, Bulldog, Edelbrock E-street, Edelbrock Performer RPM, Indy-EZ, Stage 5, Trick Flow, 440-

1-7/8" O.D. tubes with 3" 3-bolt collectors

Recommended for 400-600 horsepower range

Above the steering center link design offers maximum header to ground clearance

One piece header tubes / No slip tubes

Constructed of 16 gauge mild steel tubing

Mandrel bent on sophisticated computer controlled bending machines for precise fit and uninterrupted exhaust flow. The mandrel bending process maintains a constant inside diameter of the tube for a smoother finish with no restriction of flow and no crimping of the tubes.

3/8" thick laser-cut header flanges contoured for a leak free fit

3/8" thick laser-cut 3-bolt collector flanges

Most tti Headers require a mini starter. You can visit their website for all details.

For local sale only. Headers are a bear to box, and cost a fortune to ship.

View attachment 87770

View attachment 87772

View attachment 87773

View attachment 87774

View attachment 87775

View attachment 87777

View attachment 87779

View attachment 87780

View attachment 87781
Item Is Still For Sale. Thanks Alan
 
Status
Not open for further replies.
Top