Unisteer Rack & Pinion Units

[moparnut74]

Hello. Has anyone installed one of these units ? How do they perform in a small block Barracuda for a street car ??? :glasses2: Thanks!

 

[moparleo]

Very well. Installed one in a 73 Challenger a few years ago. Has a 360 crate and TTI headers. Eliminates a bunch of conventional front end parts like : inner & outer tie rod ends, idler arm, pitman arm, steering gear box, center link, old style power steering pump. Also installed Magnum Force upper control arms. KYB shocks. Welded lca reinforcement plates from Mancini Racing. Drives like a late model car.

 

[moparnut74]

Awesome, thanks...

 

[Adrian Worman]

Will these fit big block cars too?

 

[moparleo]

Yes. Same kit , different power steering pump bracket. Here you go guys.

http://www.unisteer.com/e-body/search-by-vehicle/mopar/e-body.html

 

[racer939393]

Very well. Installed one in a 73 Challenger a few years ago. Has a 360 crate and TTI headers. Eliminates a bunch of conventional front end parts like : inner & outer tie rod ends, idler arm, pitman arm, steering gear box, center link, old style power steering pump. Also installed Magnum Force upper control arms. KYB shocks. Welded lca reinforcement plates from Mancini Racing. Drives like a late model car.

did you have` a problem with the linkage binding and not able to turn steering wheel on mine where the steering column u joint goes on the rack and pinion. my is at such a angle can not turn wheel

 

[moparleo]

You might not have the u-joints indexed properly. The should not bind, that is why they are a u-joint.
1970-74 Mopar E Body Small Block Power Rack & Pinion Kit, Black

Scroll down to lower right for detailed instruction info.

 

[fk5aar]

1970 -74 challenger or Cuda custom rack & pinion set up

Is this what you have moparleo? It's not far from me and I was thinking about picking it up and saving some money. What do you think?