According to the Mopar parts manual, I should be using a 3 nipple breather for a 1970 Hemicuda with a shaker (of course). I've seen pictures with anything from the 1 nipple to the 3 nipple. Any ideas on which one is the right breather and where all of the lines would go?
Which breather should I be using
- Thread starter Cuda_mark
- Start date
quapman
Well-Known Member
- Joined
- Dec 28, 2008
- Messages
- 878
- Reaction score
- 227
I'm pretty sure it's a 2 nipple unless it's got CA emissions, then it's a 3.
The big line goes to the air cleaner, the medium sized line goes to the rear carb bowl vent and the smallest line connects to the vapor line that goes back to the tank on CA cars. N95 is the code IIRC.
The big line goes to the air cleaner, the medium sized line goes to the rear carb bowl vent and the smallest line connects to the vapor line that goes back to the tank on CA cars. N95 is the code IIRC.
Similar threads
