• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

WTB Wtb radiator and fan shroud 74 cuda

Like this

IMG_0309.jpeg


IMG_0308.jpeg


IMG_0307.jpeg


IMG_0306.jpeg
 
Sorry I need a passenger side bottom I let with a drivers side top outlet. Sorry for the confusion
 
Doesn’t have to be numbers correct. Just the actual correct fitting one. The current aluminum radiator causes the hoses to have a kink in them. I’ll measure the mounting hole spacing but I remember the core support opening being for a 22” radiator.
 
I just sold my radiator, but I still have the factory radiator shroud for sale in great survivor condition for $200.

Screen Shot 2025-10-14 at 10.40.29 PM.png


Screen Shot 2025-10-14 at 10.43.26 PM.png


Screen Shot 2025-10-14 at 10.44.05 PM.png


Screen Shot 2025-10-14 at 10.44.33 PM.png


Screen Shot 2025-10-14 at 10.45.18 PM.png


Screen Shot 2025-10-14 at 10.46.01 PM.png


Screen Shot 2025-10-14 at 10.46.37 PM.png
 
Oh, I think you messaged me about the fan clutch and I told you I had already sold it as a bundle with the fan and fan mounting bolts.

My fan shroud is still available with or without the shroud mounting bolts, captive washers and U-nuts that fit on the radiator brackets.

Screen Shot 2025-10-14 at 10.48.33 PM.png


Screen Shot 2025-10-14 at 10.49.14 PM.png


Screen Shot 2025-10-14 at 10.50.00 PM.png


Screen Shot 2025-10-14 at 10.50.54 PM.png


Screen Shot 2025-10-14 at 11.58.49 PM.png
 
I bought Gumby's 22" radiator last week. I was going to use it in my Challenger until someone local to me offered me a good deal on a bigger aluminum unit this week. The 22" unit is too tall to fit in my Duster, so I would be willing to sell it to you for what he was selling it for, $80 plus the shipping. The hose flanges got a little beat up during shipping to me, but they could be easily rounded out with a tailpipe expander.

IMG_2535.jpeg
 
Oh yeah, those hose connections definitely got banged up in shipping. You’re right, a pipe expander bends them right back into shape. Maybe some pool noodles around the hose connections would work better this time.
 
Yea, I've already got them back to mostly round with a body spoon. Might pick up a pipe expander this afternoon when I stop by Oreilly for some stuff.
 
Well, I just sold and shipped that fan shroud and hardware to a 1972 Satellite Sebring Plus in Sweden. But you have another chance to buy my radiator from HPP here.
 
Back
Top