FOR SALE Lower left dash bezels

[DetMatt1]

$40 each + shipping from the Detroit area or I can bring them to the Mopar Nationals next month if prepaid. I can take more pictures of individual bezels that you are interested in.

 

[DetMatt1]

Now 30 bucks each + shipping from the Detroit area.

 

[Benrunner]

I need a left and right for a 70 rt

 

[DetMatt1]

I just have the lefts.

 

[Benrunner]

I have these and they’re evidently 71-74 . I need 70 and would like to figure out the difference

 

[Benrunner]

Left is what I need

 

[DetMatt1]

I’ll have a look at all of mine to check the part number and if they are all the same.

 

[rbbruno3]

I have these and they’re evidently 71-74 . I need 70 and would like to figure out the difference View attachment 58372View attachment 58373

70 Challenger only

 

[DetMatt1]

View attachment 58392
70 Challenger only

That’s what I was thinking with that part number, it’s definitely one that was generated in ‘69.

 

[Benrunner]

These are supposed to be 70

 

[DetMatt1]

Mine all have the same part number 298-4025.
Here are three that I just cleaned up. I still have all of the ones in the picture above however they’re not all in perfect condition. Over half of them are completely intact though.

 

[Benrunner]

Not ending in 45?

 

[DetMatt1]

Ok, here's the straight skinny.
The '70 Challenger had one detail that was different from even the one used on the '70 Barracudas. The ones I have will bolt up but won't be correct.
LH Lower dash trim

 

[Benrunner]

I’d trade one right for a left and what would be my cost to buy another left?

 

[DetMatt1]

I’d trade one right for a left and what would be my cost to buy another left?

You need the ones that are exclusive to the ‘70 Challenger I thought.

 

[Benrunner]

You need the ones that are exclusive to the ‘70 Challenger I thought.

If it works, slightly different should work right?

 

[rbbruno3]

If you have a 70 Challenger dash pad it won’t match up with 71-74 trim pieces. 70 challenger only Ebody that comes to a point. Doesn’t have the extra detail molded into it.

 

[DetMatt1]

See the extra little bead or piping detail that’s molded in on the three from my pic compared to the second pic. That’s the only difference.

 

[rbbruno3]

Benrunner, what dash pad do you have 1970 or 71-4?

 

[Benrunner]

Benrunner, what dash pad do you have 1970 or 71-4?

I have a 70 rt challenger that I’ll be restoring later. I’m gathering and learning. I’ve only had B bodies till now.