body moldings

[booyaballer]

My 70 challenger has the rubber body moldings along the sides which I can't seem to find. any ideas where i can find them?

Thanks!

 

[terrywalker]

Very hard to find, especially the original Mopar ones. @Cudahunter may be the best source for info on them. I think he may know something about them, but maybe not?
Terry W.

 

[pschlosser]

If you refer to the rubber door-ding protector trim running along the body line, I think those were dealer installed, not an OEM factory part. So there may be several options that will work and look vintage.

 

[terrywalker]

Here's a few pieces I have that follow the body lines of the Challenger. They had female plastic pieces slid into the molding channel on the back which were then attached to the male metal pins on the fenders, door and rear quarter panels. The pins looked like the pins used to hold the clips for the exterior windshield trim moldings. When I removed these, I had to weld up alot of holes after removing the pins.
Terry W.

 

[6PKRTSE]

They are a factory molding and hard to find since most people have removed them over the years and discarded them.

 

[Xcudame]

Yes, protective body side mouldings are very hard to find! And when you do find them, pretty expensive. The option was V5* where * is the color.

 

[One of few]

I have some 1970 V5X pieces that are not it terrible shape, I don’t have a complete set, but it’s a start.

 

[booyaballer]

hard to find indeed. Yes Terry W., the molding channels and inserts is exactly what i need. specifically a channel for my passenger door (56.5in) and the driver side fender (60in).

I have these but they might have been glued to the body of my car since the channels/tracks are missing.

 

[booyaballer]

I have some 1970 V5X pieces that are not it terrible shape, I don’t have a complete set, but it’s a start.

i send to a pm. thanks

 

[terrywalker]

@booyaballer. I'm in Washington state. If you lived close to me, I'd tell ya to come over and get them. Shipping is a killer now. I'd go out and measure the long one for you but I fell and injured my right hip today and am struggling to walk. ER took an x-ray and said I didn't break anything. Maybe tomorrow.
Terry W.

 

[pschlosser]

ER took an x-ray and said I didn't break anything. Maybe tomorrow.

I vote don't break anything, tomorrow, either.

 

[terrywalker]

Ok. I won't break anything tomorrow. I truly thought i had broke my femur or pelvis when I fell today. I need to pay closer attention to where I'm walking.

 

[Xcudame]

@terrywalker I'm glad you didn't break anything! Stay safe! Don't take any necessary risks!

 

[tullm]

@booyaballer, I bought a set of V5X moldings from @One of few last year. The shipping tube was 69.5 X 4. I don't recall the total weight. The tube was shipped via USPS from MI to Northern VA. I don't recall the exact price but it was reasonable. I'm confident you'll find both @One of few and @terrywalker are excellent people to do business with just as I have.

The door pieces seem to be the least hardest to find, just keep a sharp eye on any 1970 -74 doors for sale.

Good luck with your hunt.

 

[tullm]

Terry,

I second what others have stated regarding your fall. I'm sure you'll be sore for a few days to a week but better than the alternative. It was such a great pleasure to meet your son last year. Hopefully you can still make it to Carlisle this year.

Take care.
M.

 

[booyaballer]

Definitely take your time Terry and get healthy first! I have plenty of other car issues that need attention.

Thanks everyone for the input!

 

[Odin]

My 70 challenger has the rubber body moldings along the sides which I can't seem to find. any ideas where i can find them?

Thanks!

I am not sure if it is helpful but I may have a full set off my 71 around here somewhere. I recently moved cross country so everything is still scattered in various boxes. I too am injured so it may be a bit before I can start rummaging through stuff. I’m in west central Indiana now

 

[terrywalker]

The straight piece in my photo is 56.5 inches long.
Terry W.

 

[Old B5]

My 70 challenger has the rubber body moldings along the sides which I can't seem to find. any ideas where i can find them?

Thanks!

My 70 challenger has the rubber body moldings along the sides which I can't seem to find. any ideas where i can find them?

Thanks!

I have an entire set that I will dig out later. I will PM you with what I find

 

[Old B5]

I have entire set I will sell you for $200 shipped. They aren’t mint but could be better with a little TLC. The only one I would say is not good is one of the door pieces. The door pieces appear to be interchangeable by flipping them over.