Search results for query: *

Awesome Thank you so much

If you look at Build line 3 follow to the left first is steering Column then next is Steering Wheel right under this is 69 X9

Yes I was traveling those same lines too here is my Broadcast sheet

Learned Code readers I want to put the right steering wheel on my 1971 Barracuda the build sheet that shows the steering wheel as 69 X9 and I am unable to find our what the 69 stands for I know the X9 is black. I have a 1972 steering wheel on it right now 2-spoke sport steering wheel. Thanks

Must be A wife and Cuda think ? When we were married she did not like driving my first 72 Cuda so we bought her this 79 Z-28 4-speed and she was so happy she has kept it all these years. I had to sell a vehicle at that time and the Cuda brought the most money so away it went. When it came time...

Awesome picture ! and I love the way your car looks with the Tire combo and stance you have. Congratulations the jet looks very cool too. But didn't you know Cuda's and Z-28 go together well for husband and wife.

Thank you that is just what i wanted to find out. here is my vin and it looks like the build sheet does match my VIN

Fantastic information Vaanth and I thank you. But I guess my question was a bit unclear. Here is what I'm asking why in the slot for say an example of Shocks is marked with a "5" and not a 2 or 7 and why is Power Steering marked with a "7" and not a 5 or 3 What do the individual numbers mean if...

My question is on the build sheet checkoff area of what the vehicle is equipped with they have number as in 3, 2, 5, 7 in the perspective ares as they check these off what is the significance of the different numbers. See my build sheet Number 11 remarks

Would like to start and tune my 426 Hemi before installing in my 71 Cuda this summer. Seeing how its time to start thinking about the spring engine swap I'm looking for a Mopar shop that will start and dyno at the same time. I live about 30 miles south of Portland Oregon so a shop anywhere in...

Titan 1969 I had a similar issue when I had my factory sure-grip 3:91 diff pumpkin from my 1971 Barracuda rebuilt by 6-states. After many trips there and phone calls and two years of them saying just take to a parking lot and turn tight corners right and left and it will break in. I finally...

Awesome thanks a ton Katfish and Vaanth I should be driving then this week-end

I due believe I have it right on the Column because as you said it only goes one way. The follow up is when I attach it to my steering box there is multiple alignment slots on the spline that hooks to the coupler. So with the front tires strait and setting in my seat to align steering shaft...

I have a 1971 Barracuda with the two spoke Rally steering wheel and I have rebuilt the Column per Cuda Codys awesome videos anyhoo I did not take a picture of the orientation of the steering wheel. So my question of the Mopar swamys does the spokes point down or up when the steering wheel is...

I have been told by quite a few of you and good gear heads to locate my electric fuel pump back by the tank well I learned my lesson. The first summer outing of my 71 340 Cuda this Fathers day had a small hiccup as I tried to start it, it just cranked and cranked. So as you know spark and gas is...

Oh do we hear you. Pic Start 2014, Pic Mid 2021, Pic Now 2024/2025 winter

Hey Avalanche Keep in mind that when you have a sure grip rebuilt there are two different shims in the bearing kits the most common that they use has the thicker shims and I went thru two years of a sure grip that was almost a total lockup. After receiving no real good feed back from SixStates...

Oh mine was doing the same thing. I did the same think you did took out and cleaned and lubed then back in and still the same. But then on better inspection I found out that the carpet had a loose piece that was put in because the original carpet shifter hole was cut to large. The guy just cut a...

I need measurment to convert my 71 k-frame into Hemi k-frame for my e-body 426 hemi swap. I would like to find someone out there that could give me the measurment to where to place the hemi weld on brackets for the factory location. Or pehaps someone in or near the Portland Oregon area that has...

Oh, ok thanks and do you have a rough estimation on how long to close. Thanks