Rally Steering Wheel

[CudaGapCuda]

I have a 1971 Barracuda with the two spoke Rally steering wheel and I have rebuilt the Column per Cuda Codys awesome videos anyhoo I did not take a picture of the orientation of the steering wheel. So my question of the Mopar swamys does the spokes point down or up when the steering wheel is strait. I want to be sure its not upside down.
Thanks

 

[heminut]

The steering wheel will only line up in one position because of the tab on the can that fits in a slot on the wheel. It looks correct in your picture.

 

[CudaGapCuda]

I due believe I have it right on the Column because as you said it only goes one way. The follow up is when I attach it to my steering box there is multiple alignment slots on the spline that hooks to the coupler. So with the front tires strait and setting in my seat to align steering shaft coupler I need to know how to hold the wheel spokes up or spokes down.

 

[Katfish]

I believe down, you want the most visibility of the gauges

 

[Vaanth]

I have a 1971 Barracuda with the two spoke Rally steering wheel and I have rebuilt the Column per Cuda Codys awesome videos anyhoo I did not take a picture of the orientation of the steering wheel. So my question of the Mopar swamys does the spokes point down or up when the steering wheel is strait. I want to be sure its not upside down.
Thanks

View attachment 146188

The two spoke steering wheel pictured, first available in 1972 but fits 1970 or 1971 too, mounts with the spokes angled downward, as shown in the following images:

With all stock parts and the master splines lined up on each component in the column to steering gear, it should align properly.

 

[CudaGapCuda]

Awesome thanks a ton Katfish and Vaanth I should be driving then this week-end