I did an extensive search on this forum for rear side windows Remove & Re-fit for Challenger but could not find anything but this one is a great thread for side windows on Cuda - they woudl be pretty much the same...
Does anyone know if there is much difference in pressure between the standard oil pump output and the high volume pump? Obviously volume of oil is increased due to the deeper impeller and housing but I was wondering how this affects the oil pressure?
I am interested in hearing more from you and your experiences about this. I have heard a few times that an HV pump should always be used with a higher capacity pan, as they do suck out more oil at extended higher RPM use. And as the oil in the top takes time to get back to the pan, there is...
Sorry for the late reply, for some reason FEBO doesn't send an email to me even if I click Watch posts. Anyway, appreciate the offer thanks for photos... if you still have it I will certainly take it if you are able to send it USPS First Class? Ok to PM you to exchange details re payment &...
I have been searching for a replacement top of dash speaker grille for quite a while and have been amazed/frustrated by their cost on ebay. Just a small bit of molded plastic really, made in ?? wherever. Prices seem to range from over $95 to $135. With shipping of around $28-35, plus tax/duty...
Yes I know all about that "getting older" thing. I couldn't even be bothered looking at Barracuda /Cuda badges' sizes to see if my dash cap is to suit one. I'll just go with Plan B and glue a spacer in so it sits off the dash a bit. As I said, I could trim off the black tray bit from the...
Hi, I am building a 1971 340 for my 71 Challenger (not the original engine, this came out of a 340 Duster). The heads that it had on it, which I have no idea if they were original for that block, are 360 J heads which have that cast into them; with the smaller 1.88 intake. I would assume that...
I'm in Australia and I can only relate second hand info. A guy I know and have dealt with several times (who isn't poor either) told me how
he used to buy gear from Hughes until he got abused once over the phone by DH, said he was the most arrogant person he has yet come across. Not sure if he...
I'm sure the dash caps are (or were) often a bit of a hit or miss situation - but this dash cap fits very well and even a closer than normal look will pass most tests. But it's most likely the space for that particular emblem was either not made to the correct size or it is to suit a smaller...
I refuse to buy PG stuff because it's all made in China. As well, it's over-priced chinese. I know I would sound a bit gnarly and stubborn, but I would rather put worn / used but presentable OEM stuff that's made in USA or Canada 50 years ago on my car. Or new items Made in USA or even Mexico...
And yes, I would also have thought that they would have used the same sized badges for both E bodies, to save on manufacturing costs on crashpads. But it seems to be just another little quirky difference that comes up between models.
I have taken some photos. On close inspection the R/T letters now looked to have been drawn in by someone, and they were beginning to wear off. A little polish and it disappeared! But I didn't know about that when I bought it so I assumed it was a factory thing. I have measured it and also...
Hi - this is not a question really, just an irritating observation. I bought a nice used Challenger R/T dash badge (I think you call them "emblem") from Ebay USA to sit into the space on the RH side of the dash pad. But it doesn't fit. The indent is too narrow. Now this dash pad is actually...
Does anyone know what sort of clip or fastener holds the stainless trims (bottom of vinyl) to the C-Pillar? There are posts that stick out of the body C pillar but what actually slides inside the stainless mold so that they can clip on to the posts? And what are they called so I can try and...
Yeah true... Well the guy did not have what I would call professional courtesy or was warm or friendly so that was a little odd to a potential customer with cash to spend on his products. I got the impression I was being a pain in the A. Does he treat every inquiry like that? But at least I...
Interesting! Actually, I remember when reading Catch-22 that they even mentioned an IBM computer then - and that was set in 1943.
I got a reply back from Brett at DataTags in Colorado. He said he can't and maybe the only way would be if I had all the info. He said Chrysler has no info on the...