Cazbah362
Well-Known Member
- Joined
- Feb 3, 2012
- Messages
- 218
- Reaction score
- 28
Making some progress on the punch list:
1970 Cuda - New Go Mango
- Thread starter Cazbah362
- Start date
Cazbah362
Well-Known Member
- Joined
- Feb 3, 2012
- Messages
- 218
- Reaction score
- 28
Had a nice weekend and went to TnT on Friday and a Coffee and Cars on Saturday. At TnT, I had the opportunity to run the car down the track several times. With a full tank of gas, family in the right seat, Radial T/A's and very little understanding of how the car would react, best times was 13:68 at 101.89. Nice thing is, once I figured out track conditions and car response, car performed consistent at that speed and between 13:68 and 14:05. Cool part about it, family had a great time, they are still ribbing me about my first few passes, which included everything from missed gears, lots of gears with spinning tires and shamefully - stalling it.
Couple of things, this track is at about 6000 DA, and is not generally well prepped for TnT. Could I have went faster - oh yes, kicking the person in the right seat out, dump some fuel, better tune, slicks, etc. But, would I have the same stories - no.
Next day was the Reno Air Races - awesome (Unlimited with old piston driven WWII type planes - SHWING!!!)
On Sunday - about a 70 mile round trip to Coffee and Cars at a common coffee shop. Car ran great, drove on the Interstate phenomenally and no issues. Of the 35ish cars, only two old muscle cars, mine, a 67 FireBird and a 70 Bronco, the rest - all modern tuners.
So future improvements - Tires and wheels, found some factory seats to re-do, and slowly working on a new cam with heads. Heads came back from the machine shop last week, so we are moving. Looking at a 270 VVT cam - nothing too drastic. Heads where inspected, decked, cleaned, valve job, seals, and matching valve springs.
There's the weeks work -
V/r
CP
Couple of things, this track is at about 6000 DA, and is not generally well prepped for TnT. Could I have went faster - oh yes, kicking the person in the right seat out, dump some fuel, better tune, slicks, etc. But, would I have the same stories - no.
Next day was the Reno Air Races - awesome (Unlimited with old piston driven WWII type planes - SHWING!!!)
On Sunday - about a 70 mile round trip to Coffee and Cars at a common coffee shop. Car ran great, drove on the Interstate phenomenally and no issues. Of the 35ish cars, only two old muscle cars, mine, a 67 FireBird and a 70 Bronco, the rest - all modern tuners.
So future improvements - Tires and wheels, found some factory seats to re-do, and slowly working on a new cam with heads. Heads came back from the machine shop last week, so we are moving. Looking at a 270 VVT cam - nothing too drastic. Heads where inspected, decked, cleaned, valve job, seals, and matching valve springs.
There's the weeks work -
V/r
CP
SFEbody
Well-Known Member
Hey I have a couple questions for you. I am doing the same swap in my 70 baracuda but with an 8 speed AT, so I wanted to know how much of the tunnel did you have to cut? do you have any pics of that?
Similar threads
