73 barracuda parts identification help needed...

[Flathead31coupe]

Does anyone know what these parts go to?Thanks in advace..

 

[pschlosser]

Does anyone know what these parts go to?Thanks in advace..

Not as pictured.

 

[Flathead31coupe]

Not as pictured.

SorryThe picture didn't load, it's there now

 

[pschlosser]

The two parts on the left and right look like a part sometimes referred to as the Front Fender to Cowl Brackets.

Refer to: MM1108A - 1970-74 Challanger, Barracuda, Cuda; Inner Front Fender To Cowl Bracket; RH Passenger Side; EDP Coated

The center bracket looks like a K-member support piece, that attaches centerline of car from the base of the radiator support to the front of the K-member (on which the engine mounts)

If I win the contest, I choose item #4722 from the awards booklet, an extra-large NY-style pizza with uncured pepperoni and the 2x 128oz containers of Amish Lager.

 

[Flathead31coupe]

The two parts on the left and right look like a part sometimes referred to as the Front Fender to Cowl Brackets.
View attachment 153961



Refer to: MM1108A - 1970-74 Challanger, Barracuda, Cuda; Inner Front Fender To Cowl Bracket; RH Passenger Side; EDP Coated

The center bracket looks like a K-member support piece, that attaches centerline of car from the base of the radiator support to the front of the K-member (on which the engine mounts)

If I win the contest, I choose item #4722 from the awards booklet, an extra-large NY-style pizza with uncured pepperoni and the 2x 128oz containers of Amish Lager.

Thanks

 

[Adam]

The long one is the lower support that fits b/t the radiator support and the k frame.

 

[Flathead31coupe]

The two parts on the left and right look like a part sometimes referred to as the Front Fender to Cowl Brackets.
View attachment 153961
Would you have a picture of where these go on the cowl to the fender thanks


Refer to: MM1108A - 1970-74 Challanger, Barracuda, Cuda; Inner Front Fender To Cowl Bracket; RH Passenger Side; EDP Coated

The center bracket looks like a K-member support piece, that attaches centerline of car from the base of the radiator support to the front of the K-member (on which the engine mounts)

If I win the contest, I choose item #4722 from the awards booklet, an extra-large NY-style pizza with uncured pepperoni and the 2x 128oz containers of Amish Lager.

 

[Flathead31coupe]

The two parts on the left and right look like a part sometimes referred to as the Front Fender to Cowl Brackets.
View attachment 153961
Do you have a picture possible of how these are mounted... Thanks


Refer to: MM1108A - 1970-74 Challanger, Barracuda, Cuda; Inner Front Fender To Cowl Bracket; RH Passenger Side; EDP Coated

The center bracket looks like a K-member support piece, that attaches centerline of car from the base of the radiator support to the front of the K-member (on which the engine mounts)

If I win the contest, I choose item #4722 from the awards booklet, an extra-large NY-style pizza with uncured pepperoni and the 2x 128oz containers of Amish Lager.

 

[Flathead31coupe]

I believe I found where they go online.Here's a picture in case somebody else needs to know.Thanks...

 

[larry4406]

Best picture I have of the fender support brace.

 

[Flathead31coupe]

Best picture I have of the fender support brace.

View attachment 153995

Thank you.

 

[Flathead31coupe]

Best picture I have of the fender support brace.

View attachment 153995

Does it attach to anything?Or is it just a brace or what?Thanks

 

[larry4406]

Does it attach to anything?Or is it just a brace or what?Thanks

It bolts to the side of the cowl.

Then there is an upward vertical bolt to secure the fender to it.

 

[Flathead31coupe]

It bolts to the side of the cowl.

Then there is an upward vertical bolt to secure the fender to it.

Thanks

 

[larry4406]

Here is an excerpt from the '71 Body manual for a Barracuda. It shows a stud at this location, not a bolt.

 

[Flathead31coupe]

Here is an excerpt from the '71 Body manual for a Barracuda. It shows a stud at this location, not a bolt.

Here is an excerpt from the '71 Body manual for a Barracuda. It shows a stud at this location, not a bolt.
View attachment 154014

I\n Noticed that the diagram shows Fender bolts in the tops of the fenders, except for the bottom of the Fender by the door has studs, mine seems to have studs on top of the Fender and boats at the bottom of the Fender by the door any clues. Thanks

 

[larry4406]

I\n Noticed that the diagram shows Fender bolts in the tops of the fenders, except for the bottom of the Fender by the door has studs, mine seems to have studs on top of the Fender and boats at the bottom of the Fender by the door any clues. Thanks

To my knowledge only the TA’s and AAR’s had studs on the top.

I will look at the ‘73 body manual I found on line later when I am at my desktop.

 

[Flathead31coupe]

To my knowledge only the TA’s and AAR’s had studs on the top.

I will look at the ‘73 body manual I found on line later when I am at my desktop.

Ok thanks

 

[larry4406]

The '73 body manual has pretty much the same picture of the fender attachment as the '71 manual.

Imperial, Chrysler, Plymouth passenger car body service manual, 1973 : Chrysler Corporation : Free Download, Borrow, and Streaming : Internet Archive

Cover title: Plymouth, Chrysler, Imperial: 1973 body service manual

archive.org

 

[larry4406]

I don't do fakebook but found this post where you can see the studs and nuts that go at the bottom of the fenders and at the cowl bracket.