Carb rebuild

[wantonebadebody]

Bought a good core for rebuild
Anyone suggest a rebuilder?
4732s i put a kit in it but bogs terrible

 

[Chryco Psycho]

Scott Smith Harms
Is the accelerator pump squirting fuel .
Is the float level high enough ?

 

[340challconvert]

I hear good things about Woodruff Carbs; another one of our sponsors!

 

[wantonebadebody]

Scott Smith Harms
Is the accelerator pump squirting fuel .
Is the float level high enough ?

no it is not squirting fuel
yes float is perfect 5/16th 13/16

 

[wantonebadebody]

Scott Smith Harms
Is the accelerator pump squirting fuel .
Is the float level high enough ?

Does anyone know how to get the squirter to work, i put a new accelerator pump in but somthing may be clogged?

 

[Chryco Psycho]

then there is some problem with the accelerator pump circuit either a bad pump seal or a blockage in the passage or squirter

 

[wantonebadebody]

then there is some problem with the accelerator pump circuit either a bad pump seal or a blockage in the passage or squirter

Yes i was trying to figure that circuit out? do you know where to check for blockage?

 

[Chryco Psycho]

the passage goes from the bottom of the pump up to the center of the carb where the squirter mounts , you may be able to run a thin piece of wire through it most of the way at least , compressed air will work well also .

 

[wantonebadebody]

the passage goes from the bottom of the pump up to the center of the carb where the squirter mounts , you may be able to run a thin piece of wire through it most of the way at least , compressed air will work well also .

i assume its the center hole under the squirter?
There is also a one-way valve at the bottom of the bowl