Clutch safety switch repair

[retolman]

I broke off the wire flush with switch. Need to now how to repair it. Has NE one successfully repaired the manual transmission clutch safety switch? It works fine but needs a new wire lead. You can buy the wiring harness for it but I'm not sure how to take it apart to replace the wire. Oh BTW this is on a 72 Cuda.

 

[moparleo]

Is this what your switch looks like ?
http://thumbs3.ebaystatic.com/d/l225/m/mwc7C--7qBytTu6V59u7DQg.jpg

 

[retolman]

No it doesn't.
It looks like this one.
Which has the same problem as mine.
http://www.ebay.com/itm/71-72-73-74...TCH-/201278427791?hash=item2edd21128f&vxp=mtr

 

[retolman]

And here's the wire harness for it.
http://www.ebay.com/itm/Mopar-A-Bod...amp-/361273376466?hash=item541d923ed2&vxp=mtr

 

[Adam]

Doesn't look too hard; drill the rivet next to the wire and bend the tabs out so you can remove the black cover and get to the insides... could prob solder a new wire in, and pop rivet, or use a small screw to replace the drilled rivet. It's already broken, so you cant hurt it!

 

[retolman]

I hope it's that easy. I'd still like to hear from someone who's actually repaired one before trying it myself. Seeing the prices for them is so high.

 

[Chryco Psycho]

JSretorations can fix it for you

 

[retolman]

Ok Chryco I'll check it out thanks.

 

[Chryco Psycho]

http://www.jsrestorations.com/