• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

complete dash harness replacement and the signal lights don't work

Golden Boy

New Member
Joined
Nov 12, 2024
Messages
1
Reaction score
0
Location
Saskatoon
and i can't get the map light to power up. door switches don't trigger dome light either. seems like everything else works. Even 4 way hazard lites work. Anybody got ideas as to how to chase this problem down? Steering column connector is well connected. dash is installed/grounded
 
Was this a repo harness or one removed from a car? I removed one from a working car and everything worked fine when I was done.
 
Only the solid yellow wires at each door switch are the dome/courtesy lamp switching. Yellow with black tracer at both door switches is the ignition switch lamp time delay trigger. The third black wire on the driver’s door switch would trigger a lights on buzzer if so equipped.

The door switch complete and trigger the delay circuit to ground. In short check you ground at the door switches.
1768743195916.jpeg
1768743389935.png
1768743437100.png
1768743469950.png
1768743314235.jpeg
 
Last edited:
Back
Top