• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Do I have a 340 Rallye Challenger??

Looks like it may have had single exhaust?
I don't see a factory hanger on driver's side.
If so, it was a 318
 
Last edited:
That would be a really rare tranny! All the 833's I've seen were 4 speed manuals! 😜
1777669603095.png
1777669606368.png
1777669609818.png
My bad I'll own it!
 
Looks like it may have had single exhaust?
I don't see a factory hanger on driver's side.
If so, it was a 318
The driver side rear frame rail is rotted out there but if you look on the rear seat back/floor you can see the hangers on both sides. And, the plot thickens. It’s is a suregrip rear end.

IMG_5781.jpeg


IMG_5782.jpeg
 
Looks like it may have had single exhaust?
I don't see a factory hanger on driver's side.
If so, it was a 318
The driver side is rotted out there on the frame rail. But if you look, you can see hanger straps on both sides on the rear seat/back floor. Also, the plot thickens, it has a suregrip rear end.

IMG_5781.jpeg


IMG_5782.jpeg
 
Behind the hanger straps is there a bracket that looks like this on the drivers side? Should have a backing plate on the inside of the car.

Passenger side similar but welded on.



IMG_0606.jpeg
 
Last edited:
Back
Top