SOLD E Body Parts

[440WB]

E body parts -

have many USED parts from my Cuda cars -

Door rubber gaskets - $5 - 25
Door felt - $2 - 25
Door Handles - $25 - 85
Door latch parts - $10 - 75
Roof Window Chrome trim - $35 - 75 ea side
front windshield - rear window chrome trim - $10 - 125
Cuda chrome wheel well trim - $85

Door glass - $50 ea
Door window track parts - $5 - 35
Dash Wire Harness's - $40 - 100


pics upon request -

located NE of Detroit

 

[tklockwood]

Interested in wiring harness stuff. I am going to use a Painless Mopar harness but need some stuff. I specifically am looking for the connectors and wiring for the headlight, dimmer, and windshield wiper switches. I would also like an underhood 2 speed wiper harness. Again mainly for the motor connectors. I know you didn't mention that but thought I would ask anyway. What can you do for me and what would it cost?

Thanks.

 

[440WB]

Im sure I have a couple cut up harness,
will look to see

 

[tklockwood]

Excellent! Thanks.

 

[Mad Cuda]

I need a backup light switch wire harness for a 1973 Barracuda with manual transmission. The tranny is a 1970 383 4 speed that came out of a different car. Know where I may get one. I tried searching the web but only found it for other year models with an automatic transmission. Thanks

 

[tklockwood]

Im sure I have a couple cut up harness,
will look to see

Did you have a chance to look for a partial harness yet by any chance? No rush, just checking... Thanks.

 

[Mad Cuda]

I believe I found one, but not sure if it will work. I'll call them tomorrow and ask them if it will fit my application. If it won't work, I'll get back to you. Do you have one that may work?

 

[tklockwood]

If you mean me, I don't think so. I will be looking through all of my old wiring pretty soon for stuff I need. I will see what I find in there. I was actually responding to 440wb who thought he may have some wiring I need.

 

[Mad Cuda]

If you mean me, I don't think so. I will be looking through all of my old wiring pretty soon for stuff I need. I will see what I find in there. I was actually responding to 440wb who thought he may have some wiring I need.[/QUOTE

Sorry, yea I was responding to 440wb, but if you come across one, i’ll buy it from you. Thanks

 

[Mad Cuda]

Yea, I was actually responding to 440wb, but if you come across one, i’ll purchase it from you. Thanks

 

[440WB]

I need a backup light switch wire harness for a 1973 Barracuda with manual transmission. The tranny is a 1970 383 4 speed that came out of a different car. Know where I may get one. I tried searching the web but only found it for other year models with an automatic transmission. Thanks

I am not sure what that would look like?
can you send a pic

Did you have a chance to look for a partial harness yet by any chance? No rush, just checking... Thanks.

have a pic -

 

[440WB]

I am not sure what that would look like?
can you send a pic


have a pic -

View attachment 47047

Interested in wiring harness stuff. I am going to use a Painless Mopar harness but need some stuff. I specifically am looking for the connectors and wiring for the headlight, dimmer, and windshield wiper switches. I would also like an underhood 2 speed wiper harness. Again mainly for the motor connectors. I know you didn't mention that but thought I would ask anyway. What can you do for me and what would it cost?

Thanks.

numbers on the back of fuse panel

 

[440WB]

I need a backup light switch wire harness for a 1973 Barracuda with manual transmission. The tranny is a 1970 383 4 speed that came out of a different car. Know where I may get one. I tried searching the web but only found it for other year models with an automatic transmission. Thanks

have not found one yet...

 

[tklockwood]

I am not sure what that would look like?
can you send a pic


have a pic -

View attachment 47047

The main things I need are the three connectors pictured. The first is for an e body headlight switch.

This next one is for the wiper switch. In my case I have a 2 speed setup.

This last one is the wiper motor connector, again for a two speed.

If you have harnesses, or partial harnesses, that include these connectors let me know what you have and what you want for them. Thanks.

 

[Vcode]

Interested in the bucket seat bases, cowl grills, and looking for seat tracks.

 

[440WB]

The main things I need are the three connectors pictured. The first is for an e body headlight switch.View attachment 47167
This next one is for the wiper switch. In my case I have a 2 speed setup.
View attachment 47168
This last one is the wiper motor connector, again for a two speed.
View attachment 47169

If you have harnesses, or partial harnesses, that include these connectors let me know what you have and what you want for them. Thanks.

after looking at all my harness's ( 6 pairs ) I only have the headlight connector you show in the first pic -

 

[440WB]

Interested in the bucket seat bases, cowl grills, and looking for seat tracks.

alright - I have what your asking for -

 

[Jim k]

I need wheelwell trim for my 73 cuda. How nice is it if ya still have it ? I'm not far from you at all 59 and van dyke

 

[440WB]

I need wheelwell trim for my 73 cuda. How nice is it if ya still have it ? I'm not far from you at all 59 and van dyke

just for a driver - you would need to polish
probably have scratch's + nicks + dents -

bought them for my 70 - never putting them on

 

[tklockwood]

after looking at all my harness's ( 6 pairs ) I only have the headlight connector you show in the first pic -

Better than nothing. What would you want for it?