I want to put a 392 with a 833 trans in 1974 challenger?

[70ch]

I want to put 833 with 392 in my 74 challenger with the trans in the stock location so shifter will be in right location. If I do that will the back of the intake hit the firewall. Mainly the runner controls. Also I was told to use tti mounts to achieve this. Motor is 2019 srt and 833 hemi trans. All help appreciated.
Ps. Would also like to use the mopar performance cast headders if they will fit.

 

[Chryco Psycho]

I have done this , I installed a 2016 392 with a 833 into a 70 Cuda , it will fit , the lip on the right frame rail has to be notched to clear the alternator , the oil filter housing will not clear the K frame if using the stock K frame . TTI mounts were used & a Milodon oil pan & pick up . TTI Headers were used , molded 90* hoses were connected to the heater core before installing the engine . The gas pedal is one of the most difficult things to make work modifying the drive by wire to the correct angle .
The factory manifolds will interfere withe steering box .