• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Max Wedge Indy SRs

oldkimmer

Well-Known Member
Joined
Dec 28, 2008
Messages
244
Reaction score
66
I had my standard port heads opened up to Max wedge port size. He did a great job. These will be going on a 543 with a Super Victor and a 1250 dominator. Kim

33B526E4-FC2D-411F-93EA-56E92B1ED8D5.jpeg


2CCF4EC1-6D98-4916-BC55-41AF895B537E.jpeg


F7B18B67-89AC-4BAB-A79F-C6FF883D859A.jpeg


936B1D80-2513-4073-AE08-5A53064AB350.jpeg


4D4DDC04-B9E7-47F1-B234-2E5A0E4256EF.jpeg


466AE39B-38C6-4B06-BF66-431AB8546049.jpeg


F545CDCC-D849-4F71-97A4-8D1A3802E4FA.jpeg


B0A36470-0F51-4AAE-B7D0-1DA8BEDF3D43.jpeg


0DA08D14-B1D0-4831-A1CD-5C40128D3A6A.jpeg


9EDA0523-F4A8-43E2-B72A-86581C91A0EA.jpeg
 
Last edited:

budascuda

Well-Known Member
Joined
Jun 17, 2017
Messages
1,104
Reaction score
567
Looking good.....
In the sixth picture down, at 12 o'clock above the valve stem bushing, the reflections make it look like a couple of hair cracks developing.
 

budascuda

Well-Known Member
Joined
Jun 17, 2017
Messages
1,104
Reaction score
567
I am sure they are good. Sometimes the valve lapping compound trickles down the cast and makes it look like its a crack.
Good luck Kim.
 

oldkimmer

Well-Known Member
Joined
Dec 28, 2008
Messages
244
Reaction score
66
These will be going on a 543 if I ever get any ambition. I also have a Super Victor intake snd a 1250 Holley Dominator. Kim
 

Attachments

  • 3B9C9769-C3FF-43AA-BB28-C1D50EAF31C8.jpeg
    3B9C9769-C3FF-43AA-BB28-C1D50EAF31C8.jpeg
    1.1 MB · Views: 187
  • AF31346D-32BC-4D98-A7D6-150AD72D191E.jpeg
    AF31346D-32BC-4D98-A7D6-150AD72D191E.jpeg
    274.8 KB · Views: 192
  • D4B927B4-59AD-4524-9007-DDF9D0914318.jpeg
    D4B927B4-59AD-4524-9007-DDF9D0914318.jpeg
    214 KB · Views: 182
  • 64A262A9-A8AB-4D6D-9750-96FE486C662B.jpeg
    64A262A9-A8AB-4D6D-9750-96FE486C662B.jpeg
    236.4 KB · Views: 182

budascuda

Well-Known Member
Joined
Jun 17, 2017
Messages
1,104
Reaction score
567
Hey Kim, The carb can get sucked into the intake hole if its not bolted down tight! Lol

VERY nice
 

hot metal

Member
Joined
Jan 10, 2017
Messages
13
Reaction score
9
Location
England
They look nice, I bet they are better than some guys over here running MW SR 650's whatever that means... in a '69 Cuda notchback has a small s/roller, ally indy block 572 cubes @ 14:1.with a 440-2/old 1050 Dominator, 2900lb all in brkt car runs 10.0's>9.90's@129, has been 70's@130>says it all, what a waste of an easy 8 sec potential car and C16 with better heads/cam, pains me to watch it run with so much $$$ in the block going so slow.
 

oldkimmer

Well-Known Member
Joined
Dec 28, 2008
Messages
244
Reaction score
66
Mine are pretty nice. The guy does good work. I only have a stock block with billet mains. All the machine work was done along with every other part massaged. It just needs assembley. I have a Super Victor and a 1250 Dominator. Kim
 
Back
Top