• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Mystery part

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
78
Reaction score
49
Location
43040
Can anyone identify the two slightly curved pieces of metal that are painted blue in the picture. They have hooks on one side. I'm putting my 72 cuda back together which was originally partially disassembled. Any help will be appreciated thank you

IMG_20230923_121842419.jpg
 

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
78
Reaction score
49
Location
43040
Hopefully getting ready to put the key member and drivetrain in next month.

IMG_20230916_214532549.jpg
 

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
78
Reaction score
49
Location
43040
I have wiring loom covers on my 67 Camaro which run on top of the rocker and the carpet lays over it however these have hooks so I wasn't sure thank you
 

gran coupe john

Well-Known Member
Joined
Aug 15, 2023
Messages
300
Reaction score
65
Location
Ohio
Yes they are wiring covers. They go along the inside rocker, drivers side floor board. Towards the front.
 

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
78
Reaction score
49
Location
43040
Thanks for the info. I'll bet what I thought were hooks were the spot weld sites
 

EW1BH27

Well-Known Member
Joined
Dec 31, 2021
Messages
478
Reaction score
215
Location
Canada
Here they are in my car and a welded tab picture (not my car)

Wiring Covers.jpg


WiringSheild 5.JPG


They're available new if you have broken tabs, which is very common.
 
Last edited:

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
78
Reaction score
49
Location
43040
Thanks that was very helpful. Unfortunately when I started out there wasn't much of a floor in this car. It's nice to have some pictures for reference.
 

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
78
Reaction score
49
Location
43040
I really appreciate that. Like probably most you guys restoring cars I'm over budget so I've got sheet metal and I can weld a couple of tabs on my old ones and install them again. Thanks to all
 

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
78
Reaction score
49
Location
43040
I've got the backend finished and now I'm going to try to finish the front end and then we'll put the drivetrain and k member in.

IMG_20230915_190921817.jpg
 
Back
Top