• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Mystery part

hsb shadow

Well-Known Member
Joined
Dec 30, 2022
Messages
174
Reaction score
122
Location
43040
Can anyone identify the two slightly curved pieces of metal that are painted blue in the picture. They have hooks on one side. I'm putting my 72 cuda back together which was originally partially disassembled. Any help will be appreciated thank you

IMG_20230923_121842419.jpg
 
Hopefully getting ready to put the key member and drivetrain in next month.

IMG_20230916_214532549.jpg
 
I have wiring loom covers on my 67 Camaro which run on top of the rocker and the carpet lays over it however these have hooks so I wasn't sure thank you
 
Here they are in my car and a welded tab picture (not my car)

Wiring Covers.jpg


WiringSheild 5.JPG


They're available new if you have broken tabs, which is very common.
 
Last edited:
Thanks that was very helpful. Unfortunately when I started out there wasn't much of a floor in this car. It's nice to have some pictures for reference.
 
I really appreciate that. Like probably most you guys restoring cars I'm over budget so I've got sheet metal and I can weld a couple of tabs on my old ones and install them again. Thanks to all
 
I've got the backend finished and now I'm going to try to finish the front end and then we'll put the drivetrain and k member in.

IMG_20230915_190921817.jpg
 
Back
Top