rear calipers diameter

[gtw940]

Ok here goes. I am installing a set of Billet specialtys 15x10 on the rear and the disc brake caliper is binding on the inside of the wheel when i tighten the lugs. I am about to start grinding on the caliper housing. wondering if the caliper height for aerospace or wilwood brakes might be less. when i say height i mean a smaller diameter in order to not bing the inside of the wheel. street strip car so not a showcar but pretty nice and itll scoot.

 

[Heywodja]

I am clueless. When I need brake help I text Cass @ www.doctordiff.com he is my guru for rear ends and brakes.

 

[mrmopar340]

When I put my Wilwood brakes on it stated I would need to run a 16" wheel on the rear to clear the caliper.

 

[gtw940]

Willwoods are on and they fixed the clearance issue, 11" rotor and the calipers clear my billet 15x10s.
Next issue, of course the brake line and banjo dont work! lol, oh well. the calipers are 1/8-27 but what size are the hard lines on the car?

 

[Xcudame]

Mopar 3/16" brake hard lines use 3/8-24 fittings.