Rocker panel body plugs?

[Charlie71rt]

Do the holes in the rear inner rocker panel get a body plug? If so what type,

plastic cup type or rubber?

 

[Challenger RTA]

No plugs were used in that area. Nothing saying you can't put them in. Check the hole for size that you want to fill. There are a look of different sizes 3/4" Flush Mount Black Plastic Body and Sheet Metal Hole Plugs Qty 25 0.75 Inch |

Click here more on ebay.

Pardon Our Interruption...

 

[Challenger RTA]

I have to complement you on your work. Looking good.

 

[Charlie71rt]

No plugs were used in that area. Nothing saying you can't put them in. Check the hole for size that you want to fill. There are a look of different sizes 3/4" Flush Mount Black Plastic Body and Sheet Metal Hole Plugs Qty 25 0.75 Inch |

http://[URL]https://www.ebay.com/it...Of6XI0tjQwh0JDR2g%3D|ampid:PL_CLK|clp:2332490

[/URL]

View attachment 148609

Thanks for the input, not sure we are talking about the same hole if you are referencing the hole in the torsion bar cross member in your photo, I am referring to the inner rocker.

 

[Challenger RTA]

When I was working on mine underneath. I used sign post. They come in 3 different sizes slide in each other. So if your driving down a road and bunch of sings are gone. I was there.
I was replacing a lot of signs on the Interstate highways. Took them home and knew I was going to use them for something.

 

[Charlie71rt]

sorry I can’t take credit that’s just a reference photo from the web

 

[Challenger RTA]

There where no plugs in that area. At lest that I never seen. I'm just saying you can put them in to keep it closed off.

 

[Challenger RTA]

sorry I can’t take credit that’s just a reference photo from the web

Not problem. I get them to of the net.

 

[moparlee]

Thanks for the input, not sure we are talking about the same hole if you are referencing the hole in the torsion bar cross member in your photo, I am referring to the inner rocker.View attachment 148610View attachment 148611View attachment 148612

My 71 R/T did not have plugs in those holes.

 

[Challenger RTA]

There is a chance of something climbing in there and making a home. I was checking someone's challenger at an alignment shop and found this.

 

[Charlie71rt]

As long as it’s not a snake I’m ok