Looking To Buy.....5 Speed Manual Tranny Conversion.

[03HDFB]

Looks Like I just missed a pretty good deal.....Too bad I wasn't a member Yet!!
Just checking to see if anyone on the board.....Has a Conversion Kit They've been thinking about
Getting rid of!
Thanks
G

 

[moparleo]

What 70-74 E-body are you working on ? What engine ?

 

[rbbruno3]

no kit , but that is a badas challenger you have there

 

[03HDFB]

What 70-74 E-body are you working on ? What engine ?

Sorry so Slow....It's a 1970 340 Block Based....408 Stroker with the A833 4 speed and 3.91's out the back
Here's a snap shot after putting the stripe on this weekend.

 

[03HDFB]

Thanks.....It was a fun build!! The Jeep has really turned out to be a great performer as well.....Love my Forced Induction.

 

[03HDFB]

What 70-74 E-body are you working on ? What engine ?

I hit you back....But I see on the site....If you attach a pic....the Moderator has to run thru it!
Its a 340 Block Based 408 Stroker with A833 4 speed and 3.91's out the back.

 

[Chryco Psycho]

Stay away from Keisler if you want to drive your car anytime this decade !!

 

[moparleo]

She's a beauty.

 

[03HDFB]

Stay away from Keisler if you want to drive your car anytime this decade !!

Yeah.....Been reading the posts....Truly Sucks!! And Passon is a ways out.....I talked with them the other day....Not To mention thier price point is 4500.00

Here's My '08 Build
Track ready


Street Ready


Engine Bay

 

[Chryco Psycho]

Awesome , Jamie just started supplying 855 5 spds but it will take a while to catch up with the back log , great trans though .
Hurst can supply a complete Tremec tko conversion similar to Keisler but with far better service if you wixh to go that way ,
The T56 magnum is another option but requires major floor surgery to fit it .

 

[03HDFB]

Awesome , Jamie just started supplying 855 5 spds but it will take a while to catch up with the back log , great trans though .
Hurst can supply a complete Tremec tko conversion similar to Keisler but with far better service if you wixh to go that way ,
The T56 magnum is another option but requires major floor surgery to fit it .

Thanks for the Info.....I really want to get moving on this project.....I want to make a sweet Driver!

 

[03HDFB]

Awesome , Jamie just started supplying 855 5 spds but it will take a while to catch up with the back log , great trans though .
Hurst can supply a complete Tremec tko conversion similar to Keisler but with far better service if you wixh to go that way ,
The T56 magnum is another option but requires major floor surgery to fit it .

Thanks For the Info......Yeah....I really want to get rolling on this mod......I want to make a nice driver out of it!

 

[Racer57]

I recently had a Tremec 5 speed put into my 70 Cuda. It had a 4 speed and a 3:91. The shop already had a used Tremec that they sent to Keisler to get rebuilt and bought the rest of the "kit" from them. I also had the 3:91 changed out to a 3:55. 60mph is now 2,300rpm instead of 3,800rpm. Only regret is that I didn't do it sooner.

 

[Chryco Psycho]

I have used the 833 OD in most of my cars , it offers a .71 OD ratio & is basically a bolt in , I don't have the cash for Passons 855 for now & wasn't overly impressed with the Tremec option .
4.10 = 2.91 in OD , 3.91 = 2.77 , 4.56 = 3.23 , 3.55 =2.52 etc using the 833 OD

 

[03HDFB]

I recently had a Tremec 5 speed put into my 70 Cuda. It had a 4 speed and a 3:91. The shop already had a used Tremec that they sent to Keisler to get rebuilt and bought the rest of the "kit" from them. I also had the 3:91 changed out to a 3:55. 60mph is now 2,300rpm instead of 3,800rpm. Only regret is that I didn't do it sooner.

View attachment 13830

Nice ride my friend.....Love it! Do you have any pics of thr tranny view, Interior or during install?
Thanks!

 

[03HDFB]

I have used the 833 OD in most of my cars , it offers a .71 OD ratio & is basically a bolt in , I don't have the cash for Passons 855 for now & wasn't overly impressed with the Tremec option .
4.10 = 2.91 in OD , 3.91 = 2.77 , 4.56 = 3.23 , 3.55 =2.52 etc using the 833 OD

Yeah....I've been kicking that one around as well. I have a tight budget too....(2) girls in college and (2) more to follow in 6 years!!! Hous full of lady's.....lost of drama!
Who did you get your OD kit from?
Thanks for the info....
G

 

[Racer57]

Nice ride my friend.....Love it! Do you have any pics of thr tranny view, Interior or during install?
Thanks!

No pics of it. Sorry

 

[rbbruno3]

tremec tko600


Got mine from Keisler took quite awhile cant remember but i'm thinking 6 months

 

[03HDFB]

Thanks For the Pics...Just what I needed to see!......Fricken Nice setup on thr front suspension Bro!

 

[03HDFB]

The Family Mopar's.....(2) Forced Inductions and an Old School NA