Search results for query: *

I took this apart seven years ago and I did not notice this. Two of the quarter 20 bolts dealing with the rear valance and bumper have copper washers and this is confusing. There’s only two out of the set and I don’t know their exact placement. They have the grip tight fingers underneath the...

Does anyone of you magnificent and absolutely handsome gentleman have a 71 or 72 Challenger, with an unmolested trunk and tail light and Mel hardware? I need pictures or I need a description please.

I am reinstalling the tail lights and tail light basil and I need to know if anybody knows where the four domed nuts go inside the trunk. There’s four of them they’re about 3/4 of an inch tall with the small 8 inch dreads inside and they go somewhere because they came out of the boxthat all of...

On this 71 Deputy, I cannot find my proper 10x32 front side retainer screw. Does anyone have a picture of theirs? I do have the rear retainer nuts that came off, but I misplaced the front end, I need a picture or the head style for this restoration. Thanks guys!

For my fellow restoration gentleman where do you get the white vapor barrier glue that holds a vapor barrier to the quarters and the doors? All I have is the black monkey **** because that works for all the respirations I’ve done so far in the last few years, only this challenger, but I’m doing...

The fitment of the console ashtray is non existent. My console has a curvature, the ashtray and bezel from Classic Industries is flat as Kansas. What is the remedy for this? Here's the look that I cannot present to my client in the photo's below.

I bought a replacement ashtray and bezel for my 71 projects Console from Classic Industries. The fitment is trash. Has anybody run into this problem of not being able to find an ashtray basil an ashtray that fit a 71 consult with a slight curve to it?

Are there ANY mopar junkyards yall know about? I need a pair of quarter window stainless trim pieces that go on the body outside the window, google has nothing, I'm getting frustrated. Finishing the complete restoration of a 71 Challenger Deputy, and these are the last pieces needed to...

Here’s a pic of the trim I’ve lost since I restored the stainless. I need both. Thank you!

OK these are in a 1954 Chrysler New Yorker deluxe underneath the valve. Cover cap on a 331 hemi. What are they called? I need three more For this original rig.

Looking for the screws and paper washers, and Springsteel Nat has seen in this photograph

I need a screw and metal washer-nut for the door glass for a 71 challenger very badly. Is ANYONE parting out door glass stuff??? See the screw and insulator and washer style spring steel nuts that the screw goes into. I’m desperate folks.

I want to buy the guts out of a drivers door for a 71 challenger. I simply need the flat sheet metal nut and screw for one of the guides. I will post pictures tomorrow but I really hope somebody has some spares. Maybe I’ll buy a complete left or right but I think they’re ambidextrous when it...

I need a pair of quarter glass trim pieces for a 71 Challenger with the vinyl top, they’re about an inch and a quarter wide about 10 inches long two clips and one retaining screw hold them on the left and right outside the quarter windows. I’ve been restoring this thing seven years coming next...

On the 71 Challenger Deputy I'm restoring with the original wheels 14x6, I need a set of new trim rings that match the original and every parts place I’ve called is out of stock… 😭😭 So, if anybody have a secret supplier for the factory style original beauty rings can you hook me up?

Fellas, the bolts I need are the three eights inch screw bolt that holds the center caps on with the beautiful little Dodge symbol in the head of the bolts each car takes 20 I have six so I need 14 :) I’ll even upload a picture here in a minute thanks guys :)

I've lost the thread I was reading on the change in the production month of 1971 for the Challenger Herringbone trunk mat material and style for what came Originally in the Challenger. I have on Hand the thick vinyl die cut, and Also the thin vinyl with the fuzzy Poly Backing, Can anyone tell...

Restoring my first Challenger for a client. I can't get a good paint code for the interior plastics from my Dupont people nor my PPG people... Do any of you have or know of what company has a good interior paint to match this original "green with a sheen" as seen in my 71 Deputy console? And...

Confusing as hell but the morray receiver dryer will not fit my cut off switch. What has anyone done to remedy this? Photos included

Hello my name is Gary I'm a new guy, and restoring a 71 Challenger Deputy, (production date 10 of 74) for a customer of mine, and the key lock release just not spring back into position. When I was disassembling it there was no wavy washer between the bottom collar and the collar above, and I...