Search results for query: *

Those of you who installed an aftermarket A/C solenoid onto your carb; where did you get the power from? Did you splice into the compressor hot wire with a tap, or did you solder a wire into the comp hot wire? Wondering the best way to do this.

The horns on my 72 Challenger are toast. I need a recommendation for replacement that is LOUD. I don't want to spend the money for reproduction OE style. Thanks guys.

I have a 72 Challenger that the windows are difficult to crank up and down & the glass rattles. Probably best to pull the door panel and put in new parts but have never done that in a challenger. Can someone recommend a kit and some tips to get this done?

I relocated my battery to the trunk in my Challenger so now have some room for a coolant recovery setup. What have you used that looks nice & is functional?

I have 255/50-17 tires on the back of my 72 Challenger with 8" wheels. When I have someone sitting in the back and go over a bump the driver fender hits the tire. The fender has quite a lip on it so wondering if using a wood block and hammer is the best way to bend that lip up little to give...

The hood scoops on my 72 Challenger are blocked with the original black plates. Is there any benefit to opening those to let hot air out while sitting in traffic? I know my newer 2021 Challenger has several hood vents to let hot air out. Just wondering.

The rubber gasket on my 72 Challenger gas cap fell apart. The cap is painted and in nice shape so I don't want to replace it. Is there such a thing as a replacement gasket for these caps?

72 Challenger. When the high beams are on, I will drive for about 10 minutes and the headlights will start flickering on and off. If I turn the high beams off, no problems. I replaced the dimmer switch but that did not fix it. When the headlights go off, the running lights stay on. Seems like...

I have a 72 Challenger that I just replaced the leaf springs (with ESPO 6 leaf) and swapped the OE 8.75 with a Dana 60. Before the swap, the car alignment was perfect. After the swap the car wanders to the right. I'm pretty sure what is happening is the rear geometry is now off. Since it now...

I have a 72 Challenger I purchased recently with stock style front disc and rear drum. When I hit the brakes hard, both rear brakes lock up before the front ones appear to be applying. Since the front brakes are supposed to provide the majority of braking power; any ideas why this would be...

Have a 72 Challenger with rear drum brakes. Will be swapping the 8.75 for a Dana 60 (Strange 60). Can anyone tell me if the OE 8.75 hard lines will fit the Dana 60, or if I need to order new lines?

Does anyone have a 727 with a Dana 60? I need the measurement from the end of the transmission tail shaft to the center of the rear U-joint.

My 72 Challenger non-rallye dash does not have any labels showing what control is for what. I am not sure what that is called. Does anyone know of a replacement source for this?

I have a 72 Challenger that I need to remove the driver door panel. How do I remove the remote mirror control bezel?

The 72 Challenger I just bought has a piece missing from the hood release. The guy I got it from just has a zip tie holding it up. Any idea what the missing piece is called?

When I turn the steering wheel I hear a squeak like the bearings are dry. I know there is a bearing in the top of the column. What is the best way to lubricate that bearing short of disassembling the column?

The instrument lights on my Challenger are very dim. I have aftermarket gauges that share the same orange wire and the lights on them are fine, so don't think it is the dimmer. Besides changing the 1816 bulbs, is there anything else I could do to improve the lighting? I thought about LED lights...

The 72 Challenger I just bought is missing the light socket for the AT console light. Anyone have a picture and source for getting one? The manual says it uses a #57 bulb.

Just got my 72 today. The start of a new project! Sold my 70 duster recently and was active on the A Body forum. Moving to E Bodies now!