WTB 340 Motor mounts wanted

[B.Mike Roberts]

Anyone have any 340 Motor mounts,please contact me would love to get my Mill installed before Winter hits
Thanks
Mike

 

[72 blue 400]

have some if you havent found any can post pics

 

[tonysrt]

When Chrysler went to the spool mounts on the A body, did they do anything to improve the E body mounts to prevent them from separating. I have a 71 Cuda that had a 383 in it and it was the 2 piece motor mount. I put a Gen2 Hemi and changed K member for the Hemi mounts.

 

[B.Mike Roberts]

have some if you havent found any can post pics

Hey thanks I,m Interrested
So is it only the left side that’s 340 specific or both sides
How much ?
Thanks
Mike
Also I,m having a problem with Caliper mounts or brackets
Car was drum and I converted it to Wilwood set up I recently scrapped that during my new Rebuild,got rid of the drum spindles bought a set of Rotor spindles and brackets off a guy from a 70 Barracuda and installed I buy quite a few parts from Dodge boy in WI on Ebay and bought bolts for the mounts however they don’t get all the way flush in the hole so are there also 2 different bolts for the mounts

 

[Chryco Psycho]

Only the Left mount is different on the 340 / 360
Dr Diff or Scarebird for brake caliper mounts .
Some aftermarket mounts are available from Mancini or Roseville , they have interlocking poly mounts available for the E body , the sppol mount was a big improvement but E body never got them .

 

[B.Mike Roberts]

Only the Left mount is different on the 340 / 360
Dr Diff or Scarebird for brake caliper mounts .
Some aftermarket mounts are available from Mancini or Roseville , they have interlocking poly mounts available for the E body , the sppol mount was a big improvement but E body never got them .

Well in any case how much would you like for the Motor mount I have the right side but will buy the set if not too high

 

[B.Mike Roberts]

have some if you havent found any can post pics

How much would you like for the mounts
Thanks
Mike

 

[1971 Gran Coupe]

Hey thanks I,m Interrested
So is it only the left side that’s 340 specific or both sides
How much ?
Thanks
Mike
Also I,m having a problem with Caliper mounts or brackets
Car was drum and I converted it to Wilwood set up I recently scrapped that during my new Rebuild,got rid of the drum spindles bought a set of Rotor spindles and brackets off a guy from a 70 Barracuda and installed I buy quite a few parts from Dodge boy in WI on Ebay and bought bolts for the mounts however they don’t get all the way flush in the hole so are there also 2 different bolts for the mounts

Here is a picture of the difference of the two.

 

[B.Mike Roberts]

Here is a picture of the difference of the two.View attachment 131328

Thanks so much for this important detail

How much would you like for the mounts
Thanks
Mike

I,ve asked several times now How much please

 

[B.Mike Roberts]

Thanks so much for this important detail

I,ve asked several times now How much please

 

[B.Mike Roberts]

Maybe this message isn’t going to the Right person I don’t know puzzling

 

[B.Mike Roberts]

Hey thanks I,m Interrested
So is it only the left side that’s 340 specific or both sides
How much ?
Thanks
Mike
Also I,m having a problem with Caliper mounts or brackets
Car was drum and I converted it to Wilwood set up I recently scrapped that during my new Rebuild,got rid of the drum spindles bought a set of Rotor spindles and brackets off a guy from a 70 Barracuda and installed I buy quite a few parts from Dodge boy in WI on Ebay and bought bolts for the mounts however they don’t get all the way flush in the hole so are there also 2 different bolts for the mounts

Would like to know how much please