• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

'70-'74 Challenger Door Differences

sdcbowler

Well-Known Member
Joined
Jun 4, 2015
Messages
161
Reaction score
38
Hello FEBO Members,

Wanted to ask. Is there a difference between the location of the window crank mechanism in the Challengers. Seems like I have seen some doors where the shaft of the window crank comes through the lower square cutout, and I have seen some where it comes throug the upper squar cutout? Which is correct for which years?

Thanks
 

Chryco Psycho

Well-Known Member
Joined
Dec 28, 2008
Messages
4,402
Reaction score
2,043
Location
Panama
square cut out is for the power window switch
the regulator is in the same place
 

sdcbowler

Well-Known Member
Joined
Jun 4, 2015
Messages
161
Reaction score
38
OK,

I'm not referring to the square cutout in the 'door panel'. I know that is for the power window switch, and for the regulator the door panel would have an approximate one inch diameter hole in the same location. I'm referring to actual cutouts in the metal in the interior surface of the door itself.

InkedChallenger Door.jpg
 
Last edited:

sdcbowler

Well-Known Member
Joined
Jun 4, 2015
Messages
161
Reaction score
38
Chryco/EW

Thanks much for enlightening me........now I finally get it....:)
 
Back
Top