Juan Veldez
Well-Known Member
Here is my take: Use soft water, not tap water. Water does the cooling, but you don't want more chemicals and minerals in it that corrodes metals. Anti-freeze stops water from freezing, stops the water from boiling at a lower temperature, and it also has lubricating and anti-corrosion properties. So, the more water the better cooling. If you are not in an area that freezes, you do not need as much anti-freeze, use a little more water in the ratio (60-40ish). But understand you still need it to stop it from boiling under extreme heat and the other useful properties. As far as fluid type and changing over, see this article: 
	
	
		
			
				
					
						 
					
				
			
			
				
					
						
							 knowhow.napaonline.com
						
					
					knowhow.napaonline.com
				
			
		
	
Question: Any one use the additive product "Water Wetter"? I have had friends with motors that ran very hot use it and it came down around 10 degrees. Any other success or failure stories?
	
		
			
		
		
	
				
			 
					
				What Is HOAT Coolant? 4 Things You Need To Know
There are three main types of coolant. What is HOAT coolant and how is it different from IAT and OAT?
				 knowhow.napaonline.com
						
					
					knowhow.napaonline.com
				Question: Any one use the additive product "Water Wetter"? I have had friends with motors that ran very hot use it and it came down around 10 degrees. Any other success or failure stories?
			
				Last edited: 
			
		
	
								
								
									
	
		
			
		
		
	
	
	
		
			
		
		
	
								
							
							 
	
 
 
		 
 
		 
					
				 
						
					 
 
		 
					
				 
						
					 
 
		 
 
		 
 
		 
 
		 
 
		















