WTB Front brake drums 71

[gran coupe john]

Does anyone have these front drums for a 71 barracuda. Or know who sells them??

 

[tonysrt]

I may have a set from my 71 Cuda when I converted to Discs. Give me a day or 2 to dig them out.Weather has been snowy and more snow coming. I'll put up pic when I get them out.

 

[Mopar Nut]

Does anyone have a use for 10 inch drum brakes from a 71 B body?

I have a set of 10 inch drum brakes from a 71 Charger parts car. They have recent wheel cylinders and hardware. I usually just junk the 10 inch drum brake stuff,but someone spent some money on these. There are 4 drums,4 loaded backing plates,and two front spindles.

www.forbbodiesonly.com

 

[gran coupe john]

No hurry, car has been torn apart for years.
Thanks

 

[gran coupe john]

Does anyone have a use for 10 inch drum brakes from a 71 B body?

I have a set of 10 inch drum brakes from a 71 Charger parts car. They have recent wheel cylinders and hardware. I usually just junk the 10 inch drum brake stuff,but someone spent some money on these. There are 4 drums,4 loaded backing plates,and two front spindles.

www.forbbodiesonly.com

Just need the drums. On the b body sight also.

 

[gran coupe john]

Just need the drums. On the b body sight also.

Just need the drums. On the b body sight also.

Tried to get to that listing, wouldn't let me see it.

 

[Mopar Nut]

Tried to get to that listing, wouldn't let me see it.

It was taken down, but Kern dog gave you the contact information on the B body site.

 

[gran coupe john]

Thanks,
Want to see what tonysrt has. And others. Only need the drums

 

[tonysrt]

I'll definitely look tomorrow and dig them out.

 

[tonysrt]

John, I did my disc conversion about 35 years ago. I remember storing the drums in the basement. I added 3rd car garage and moved them up there. After kicking them around for several years figured nobody would want drums anymore. So unfortunately may have took them to the dump. I hope I haven't caused you any problems waiting for an answer. I did look high and low for them though.

 

[gran coupe john]

No problem!! I really appreciate your time and effort. Restoring to original has taken time and patience, a get gift.

 

[Pnypwr]

I have a set of 10 in fronts I just pulled the k frame to restore and I’m going disc located in ct

 

[gran coupe john]

I have a set of 10 in fronts I just pulled the k frame to restore and I’m going disc located in ct
Thanks,
Just got to know if they got enough on them to have them turned?

 

[Pnypwr]

I can pull them idk if anyone can turn them local to measure them. All the parts stores don’t do it anymore but I’ll see if I can find an inside mic to measure them

 

[gran coupe john]

Thanks,