I've been reading several threads on the disc brake position and I am some what confused on mounting the caliper to the front or rear. With the position of the new hose it fits better in the rear without any interference. Not sure if I swap to the front the hose will be too short. I have read that "always to the front" then another guy said to the rear.
Another question can't seem to get the camber correct. I replaced all the bushing in the front end and after setting it back down on the ground and taking to have it aligned they could get it moved out enough to plumb the wheel.
Another question can't seem to get the camber correct. I replaced all the bushing in the front end and after setting it back down on the ground and taking to have it aligned they could get it moved out enough to plumb the wheel.