Need to replace Steering Gear Box in my 70 Cuda
- Thread starter WhiteGP
- Start date
MoparCarGuy
Well-Known Member
- Joined
- Jun 28, 2020
- Messages
- 890
- Reaction score
- 779
The Bergman Auto Craft kit is a Borgeson PS unit and is 14:1 ratio.
You must know if you have the small or large sector before ordering.
You must know if you have the small or large sector before ordering.
Mopar Nut
Well-Known Member
- Joined
- Aug 10, 2014
- Messages
- 1,691
- Reaction score
- 1,228
don selleck
Well-Known Member
Borgeson x3
Thanks everyone ! Bergman / Borgeson it is ... Since my pump is leaking also, the complete kit seems to be the way to go !
bergmanautocraft.com
the website says it should be a small sector, ( see below ) I talked to Pete Bergman, he said small sector
market that bolts in directly, uses factory parts and does NOT require cutting your steering column!
Small sector boxes were used on 72 and prior vehicles, except C bodies.
NOTE *Due to the higher operating pressures of the updated style steering box, a cooler is recommended*
BAC Steering Box Upgrade Master Kit - Bergman Auto Craft
BAC Steering Box Upgrade Master Kit is a true 14:1 power steering box conversion kit that features much better feel than OE boxes.
bergmanautocraft.com
the website says it should be a small sector, ( see below ) I talked to Pete Bergman, he said small sector
market that bolts in directly, uses factory parts and does NOT require cutting your steering column!
Small sector boxes were used on 72 and prior vehicles, except C bodies.
NOTE *Due to the higher operating pressures of the updated style steering box, a cooler is recommended*
Last edited:
Bergman mentions ( recommends ) the cooler for the PS unit ? Did you add a cooler ?
Katfish
Well-Known Member
Lars unit looks interesting, basically same as Borgenson.
It looks like you have to buy some extra parts separately though?
I have the Borg box, not as impressed with it as others here.
It looks like you have to buy some extra parts separately though?
I have the Borg box, not as impressed with it as others here.
The Borgeson unit is the way to go. My brother installed it in his 340 car, and it works beautifully.
MoparCarGuy
Well-Known Member
- Joined
- Jun 28, 2020
- Messages
- 890
- Reaction score
- 779
Last edited:
don selleck
Well-Known Member
I have an original one that needs restored, just clean up and paint, was planning on using it, but after the last post its got me thinking that would work alot better especially in front of the radiator
Mopar Nut
Well-Known Member
- Joined
- Aug 10, 2014
- Messages
- 1,691
- Reaction score
- 1,228
Let me know if you wanna sell it.
Xcudame
Well-Known Member
Peter Bergman will never steer you wrong (pun intended)! He's a great Mopar guy!!
michael bucklew
Well-Known Member
- Joined
- Aug 24, 2019
- Messages
- 324
- Reaction score
- 39
got to replace steering box on my '71 challenger small block, power steering. which part number, for Borgeson?? also cooler is recommended, how was installation, any pictures and hose routing would be helpful. Michael 71 challenger
Hi Michael
I ordered the master upgrade kit from Bergman Auto Craft since I need a pump also,... have not got it yet, Home - Bergman Auto Craft - Home of Quality Muscle Car Parts Shoot them an email or call, they will know which box to send I believe, the also have pics and instructions for the install
Hope this helps....
michael bucklew
Well-Known Member
- Joined
- Aug 24, 2019
- Messages
- 324
- Reaction score
- 39
will do. pump is ok. trhanks
Similar threads
- Locked
