Titan1969
Well-Known Member
Thanks to many posts on forebodiesonly.com I went with the QA1 UCA and LCA upgrades. Everything went well, no issues and QA1 product is top notch and fit perfectly.
The 50+ year old LCA was very poor condition, UCA had newer ball joints so not as bad however I wanted a matched set for the control arms so went ahead and installed the UCA also.
Once completed and I set the car back down off the jacks, it sat 2.5" higher (and I did count the torsion bar rotations). So I had to drop the stance quite a bit to get back to factory.
The 50+ year old LCA was very poor condition, UCA had newer ball joints so not as bad however I wanted a matched set for the control arms so went ahead and installed the UCA also.
Once completed and I set the car back down off the jacks, it sat 2.5" higher (and I did count the torsion bar rotations). So I had to drop the stance quite a bit to get back to factory.
Last edited:
