Rebuild kits for Brake Master Cylinder

[Challenger RTA]

You learn!

 

[michigan2023]

Any chance anyone has advice they can give on front calipers and brake hose types? The calipers I got from RA fit but I can’t get the hose to connect to the brake lines I fabricated to the frame. Not sure what’s wrong calipers or brake hose does any one have any photos they can share? This one is a mid 72 and is posing lots of challenges…

 

[michigan2023]

Does anyone have any photos for a manual disk brake with pin style caliper they can share? I got the calipers in but the hose seems to be too short…it connects but rubs the outside edge of the shock and the steering can only turn part way

 

[Katfish]

Caliper should be on front.
Looks like you have the spindles reversed

Discussed here

B

Thread 'Disc Brake Caliper Position'

Jun 1, 2024

Sorry to ask something that has probably been beaten to death. I have a 70 Cuda. I have the MBM drum to disc conversion kit. I have a 70 Cuda.

1. The MBM kit shows having the caliper to the rear of the wheel. (The welded-on bracket for the brake line is towards the rear of the wheel) (Pictured)
2. Official Chrysler shop manual shows the caliper to the rear of the wheel.
3. My car came with a set of spindles in the trunk that look like they came from a junk yard (pictured). Caliper goes on the front.
4. Ehrenberg Disc O Tek says to put the caliper of the front since he says the brake lines...

• BillJ
• Replies: 22
• Forum: Member Restorations

 

[michigan2023]

Does anyone have any photos for a manual disk brake with pin style caliper they can share? I got the calipers in but the hose seems to be too short…it connects but rubs the outside edge of the shock and the steering can only turn part way

View attachment 156267

 

[michigan2023]

Thank you. That helps out a ton!
Have a great night.