Steering wheel puller?? For challenger columns

[wantonebadebody]

6 inch long bolts? Or special puller?

 

[rklein71]

Yes, just long bolts

 

[fasjac]

Oreillys has a good loaner. There’s will go inside the lip where the studs are.
If you can get one to attach the the studs the wheel goes on would probably be ok, don’t know. I’ve always had to be under that lip. Only had use it a few times but, works great.

 

[terrywalker]

6 inch long bolts? Or special puller?

View attachment 76743

Here's the puller I use. It fits inside the crush can and I use a socket on an extension.
Terry

 

[Chryco Psycho]

I have done both using longer bolts or smaller pullers that fit inside the can .

 

[moparlee]

I used the one Terrywalker shows and worked great. Loaner from Auto Zone.

 

[70chall440]

I made one using 3 long bolts, 1 nut and some tubes. Allows me to remove the crush cans from out side of them which is handy. That said, I used the ones shown for many years as well.

 

[wantonebadebody]

thanks guys i bought 10 inch long bolts!!! worked great!
I had the turn signal slop.