suspension for E body

[Carl Demers]

New member here. I have a 1970 Cuda with a 2004 5.7 L Hemi.
I have updated the brakes etc. so the next step is the suspension.
What is the better company RMS or Magnum ? Cost and performance wise. Is there other companies to consider ? Problems to over come ?
Please advise, thank you

 

[moparlee]

Welcome to the site Carl. I can't answer your suspension question, but someone here should be able to help you out. BTW, we need pics of your Cuda.

 

[moparleo]

Welcome aboard. Did you do the conversion yourself ? Pictures ??

 

[Grady Cain]

Welcome from NW CT.

 

[rbbruno3]

I bought mine from RMS. I’m very happy with it, approximately 4K depending on options. I have heard Magnum is also good now but can’t speak from my own experience. Any questions you may have from RMS call and ask for Bill. He is the owner and answers the phone.

 

[CMC]

Also, just curious. What oil pan did you end up using with your 5.7 hemi that doesn't LEAK????

 

[Joeychgo]

New member here. I have a 1970 Cuda with a 2004 5.7 L Hemi.

Interesting build - you have any photos?

 

[David DiMartino]

New member here. I have a 1970 Cuda with a 2004 5.7 L Hemi.
I have updated the brakes etc. so the next step is the suspension.
What is the better company RMS or Magnum ? Cost and performance wise. Is there other companies to consider ? Problems to over come ?
Please advise, thank you

You should also consider Hotchkis TVS. I put their system on mine, haven't driven it yet (so on I hope) so I can't give first hand feedback. I did go on a ride along in their E-Max Challenger and that car stuck to the road like it was glued, handled the turns on the autocross track with ease.

 

[Cudafor36]

I'd like to hear more about the suspension you finally order. It's in my hit list for the last few things I do.

For the oil pan on my 6.4. I used the moroso center pump one and reused the original gasket from mopar. If I were you order that gasket from the dealer and you should be good to go. It's steel covered with the proper rubber

 

[70Barracuda]

I have all Firmfeel up front and RMS in back. My seats are the problem now.