Search results for query: *

FOR SALE:: Recently discovered in backyard NW Chicagoland suburbs. Had not been driven since 1989 by the 2nd owner; currently not running but have turned engine over by hand. Was covered with tarp; complete car; no accidents; very rusty overall -- full restoration project for the right person...

'70 CUDA GRAN COUPE SHAKER HOOD FOR 440 SIX-BARREL. Has factory trim ring. Original paint Banana Yellow; flawless and 100% perfect overall condition. $7900.00 located NW Chicago area. Selling for a good friend! PM for info.

T/A CYLINDER HEADS FOR SALE -- I have four (4) bare T/A Cylinder Heads for sale. These have been my personal spares in case I would need them for my T/A race car. I've had them for over 30+ years -- stored indoors. They are not damaged or rusted, but would need a complete overhaul (hot-tank...

Interested in running your car on a real road race track? Then come find out what its all about at the NORTH SUBURBAN SPORTS CAR CLUB'S 64th Annual FREE INDOOR RACING SCHOOL (member club of the Midwestern Council of Sports Car Clubs). SATURDAY, MARCH 18, 2023; gates open for entry from 8-10AM...

I am selling my like-new VINTAGE WHEEL WORKS 16" x 8" MINI-LITE RIMS (V48 series). 5 RIMS TOTAL; comes with ONE NEW never used BFG G-FORCE COMP-2 TIRE, size 255-50-16 (used as a trunk spare). This is a perfect set-up and sized tire for these rims, as well as for our cars for cruising or road...

I am selling my like-new VINTAGE WHEEL WORKS 16" x 8" MINI-LITE RIMS. 5 RIMS TOTAL; comes with ONE NEW never used BFG G-FORCE COMP-2 TIRE, size 255-50-16 (used as a trunk spare). This is a perfect size tire for these rims, as well as for our cars for cruising or road course track events...

I am selling my like-new VINTAGE WHEEL WORKS 16" x 8" MINI-LITE RIMS. 5 RIMS TOTAL; comes with ONE NEW never used BFG G-FORCE COMP-2 TIRE, size 255-50-16 (used as a trunk spare). This is a perfect size tire for these rims, as well as for our cars for cruising or road course track events...

ORIGINAL MAS CHALLENGER T/A REAR TRUNK SPOILER: still new, never mounted (I added the Mopar Performance decal). $75 plus shipping. Located Chicago NW suburbs. I'll accept money order, or through VENMO (bank deposit).

Has anyone installed the Wilwood Combination Proportioning Valve (includes the brake line distribution body)? I have a 1972 Challenger 340 with factory power brakes. Any brake line size fitting issues? Brackets? Lines? I am using the factory Mopar aluminum master cylinder... 1-1/16" bore...

Hopefully someone can help. I've recently installed a Dr Diff 10.7" rear disc setup onto my "72 Challenger. Fronts are Cordoba 11.75" rotors and factory rebuilt new stock calipers; steel braided lines. The dash brake light stays on. I spoke with Dr Diff (Cass) and he told me the factory...

Anyone interested, come on out and watch.. or better yet run your car... on the beautiful 2.0 mile road course. BHF is located in Rockton, IL, just NW of Rockford, IL. Gates open at 7:00 AM and late registrations will still be accepted at the gate... closes 8:00 AM; driver's meeting about 8:15...

I've received notice that my In-box is full at the 25 conversation limit. How do I eliminate conversations so to allow more space for new conversations? Sorry to ask, but I can't seem to figure it out.

I plan to install the lighter weight Denso ~60 amp alternator into my 72 Challenger (actually, a 70 T/A clone done many years ago).. car used extensively for AX, HSAX and HPDE lapping events (plus local cruises... summer only). Is there a a pre-made complete wiring harness available to replace...

For those of you within the Midwest (Illinois, Wisconsin, Iowa, Minnesota, Indiana, Michigan, etc)... you may be interested to attend a FREE INDOOR RACING SCHOOL for W2W ROAD RACING, HPDE, HSAX, as well as corner working. Date: Saturday, March 19, 2016 gates open at 8:00AM; classes begin at...

Interested in getting started in racing? Hi-Performance Driving Experience (HPDE lapping sessions)? Hi-Speed Autocross (HSAX)? Wheel-to-wheel race competition? Corner working (for the best seat at the track)? Or how about just improving your skills? Then this is a great opportunity for you...

Has anyone here used the Magnum Force brand of tubular subframe connectors? Pictures? Satisfaction? Floor connection points? I may be favoring these as it appear they have good ground clearance... and my car (72 Challenger body cloned into a T/A many years ago) is a low-rider (autocross/road...

Fellow E-Body friends -- As I've done in the past, I'd like to try get a gathering of us together at a weekend for HSAX, or at least lapping during the lunch time W2W race event. I'll be entering the final 2014 HSAX event from the Midwest Council of Sports Car Clubs ( www.mcscc.org see...

I'm considering ideas to have a small (class 1) tow hitch for my 70 Challenger. I'd intend to use it for towing one of those small HarborFreight type of trailers (approx 42"x48" bed) to haul my 4 road race/autocross Hoosier A6 competition tires, etc.... basically for a day's event... about 5-7x...

I'm considering running tires with 275x35x18 (front/rear) primarily to get 200 tread wear ratings.. for competition autocross/road course events. My T/A is all setup for such events and I have 16x10 rims with Hoosier A6 275x45x16 tires (old and now corded.. to be replaced), but at issue is the...

To those who can make it, the wknd of Sat-Sun Sept 14-15, 2013, there will be a Midwest Council of Sports Car Clubs (MCSCC) race wknd in beautiful S.W. Michigan "Gingerman Raceway". Amateur road racing at its best! SEE THESE LINKS FOR INFO. www.mcscc.org www.gingermanraceway.com On...