Hello,
I'm looking for a vendor or information on making SE trim clips for the tops of both doors and quarter glass areas. These are the SE trim pieces on the 1970 1971 Challenger's. I called R/T Specialties and they do not have them or know of anyone who does? It was recommended that I...
Hello,
I'm interested in buying an A904 transmission in my area. The owner gave me the following transmission numbers to identify what the transmission originally went to. I have a couple different versions of the "Chrysler Corporation Identification Numbers" to help, but can't seem to...
Hello,
Does anyone have a template and mounting instructions/dimensions they could share for body panel louvers on a 1971 Dodge Challenger R/T. These are the louvers that mount on the body in front of the rear wheels. I'm looking where to correctly mark and drill the four holes for each...
Hello,
I'm looking for a vendor who sells the correct nut and cage parts for the front frame rails on my 1971 Dodge Challenger. These are the four nuts that are attached/connected to the front frame rails where you bolt the front bumper brackets to. I have the mounting bolts, just missing a...
Hello,
I'm looking for a vendor who sells the correct nut and cage parts for the front frame rails on my 1971 Dodge Challenger. These are the four nuts that are attached/connected to the front frame rails where you bolt the front bumper brackets to. I have the mounting bolts, just...
Hello, I have an opportunity to buy a pair of 340HP exhaust manifolds. The owner said that they were from a 1968-60 A-body car. One manifold has part number 2863552, the other is not legible. Initial research said that this part number will fit a 1970 Challenger. I’m working on a 1971...
Hello,
I have a chance to buy an original drivers side front fender for a 1972-1974 Dodge Challenger. Is there a stamped manufactures part number on this fender? If so, where can I find it? Please send picture of the location. How could I decode the part number to tell me what year it...
Hello,
Question, I have a small block (318) A904 TorqueFlight automatic transmission made in early 1970. I also have a small block (340) A727 TorqueFlight automatic transmission made in mid 1971. Are the transmission fill tubes and dip sticks interchangeable between these...
Hello,
Would someone send me pictures of the position of the inner and outer tie rod ends as they are connected to the drag link. I found a drawing in the shop manual but want to see a better example of this. Also are the tie rod adjusting sleeve suppose to be parallel with the ground or...
Hello,
What is everyone using using for upper control arm bushings? I have a 1971 Challenger with factory upper control arms. I want to install MOOG K7103 eccentric/offset bushing but can't seem to get them to press in without pushing/tipping to one side. I have all the correct busing...
Hello, I have a connection that has few manual transmissions for sale. What are the identifying casting numbers or other characteristics I should be looking for in a 4 speed manual transmission? My contact may also have other manual transmission parts available including the clutch and brake...
WTB, Looking for a Challenger passenger door belt line trim piece in good condition. I'm also looking for the hardware that attaches all four pieces. Not sure if the hardware is reproduced at this time?
Thank you,
Tirekickertoo
Hello,
I'm interested and wanted some basic production information on the 1970 Dodge Challenger T/A's. How many were actually produced? The production numbers seem to vary when looking this information up on google. Were 340 engines the only power plant installed in the T/A's or were...
Hello,
I am looking for a new front bumper for my 1970 Challenger. Recently I've read reviews saying AMD had the best bumper available. Is this true? Any opinions on GoodMark or Dynacore? Are there any other venders worth taking a look at? I'm looking for a new bumper that's as close...
Hello,
I'm considering installing new 18" Ridler wheels on my 1970 Challenger. The car has the original stock suspension. Has anyone used this brand before? I'd like to know what back spacing is required as well as other key ordering information. Post some pictures if you have these...
Hello,
I was wondering what the correct tail pipe size would be used on a 1971 Challenger with a stock 340 with automatic transmission? Would it be 2 inch or 2 1/2 inches? This would be the pipe section only that goes over the rear axle.
Thank you,
Tirekickertoo
Hello,
I am looking for a template or measurements to correctly place a factory chrome racing mirror on a 1971 Dodge Challenger passengers door. Anyone have drawings, or measurement's they'd like to share?
Thank you,
Tirekickertoo
Hello,
My 71 Challenger has long tube headers. I will be switching back to original factory exhaust manifolds in the near future. My question is, do I need any special hardware (bolts/spacers etc.) to correctly install the factory manifolds? I know I will need gaskets. If so, what...
Hello,
I restoring the honeycomb grill section on my 1970 Challenger. Unfortunately the previous owner attempted some paint work and managed to mist/coat the honeycomb section with a mixture of primer and paint. I'm looking for advice on how to easily remove this overspray. Would I need...
Hello,
Have a question for the group to help me figure out what brake line set fits my 1971 Challenger. The car has powered disc brakes and I am considering using Inline Tube. I checked out their inventory and they list 1 or 2 piece brake line sets? Sent an email to the company asking...