• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

512 Stroker Build

Ctriton20

Member
Joined
Oct 18, 2020
Messages
24
Reaction score
16
Location
Indianapolis
Hey Guys! I'm new to the forum. Just wanted to post the progress on my 1973 Dodge Challenger project. Its a Low Deck 512 stroker. Should be going on the dyno next week.



IMG_7730.jpg
 

Ctriton20

Member
Joined
Oct 18, 2020
Messages
24
Reaction score
16
Location
Indianapolis
Here are the dyno numbers from today. My builders was surprised at the amount of torque that mopar engine made. They mostly build chevys in their shop. The builder think that with enough tuning, we could get another 20 to 25hp out of it. And also by adding a spacer.
 

Attachments

  • 512 Dyno.pdf
    363.8 KB · Views: 502

Adam

Well-Known Member
Joined
Dec 25, 2012
Messages
1,637
Reaction score
693
Location
Washington
The attachment isn't displaying for me.... what were the Dyno numbers?
 

fasjac

Well-Known Member
Joined
Dec 27, 2019
Messages
2,237
Reaction score
1,126
Location
Arkansas
What a beast! Great job. Can you share cam and heads?
 

Ctriton20

Member
Joined
Oct 18, 2020
Messages
24
Reaction score
16
Location
Indianapolis
I used the 440 source 400/512 stroker kit. 10.5 cr/950 carb/Comp Cam solid lift roller (At .050...252 int. 263 exh. .660 lift 108.0). Trickflow 240 heads for solid lift cam. Trickflow single plane intake.
 

fasjac

Well-Known Member
Joined
Dec 27, 2019
Messages
2,237
Reaction score
1,126
Location
Arkansas
I used the 440 source 400/512 stroker kit. 10.5 cr/950 carb/Comp Cam solid lift roller (At .050...252 int. 263 exh. .660 lift 108.0). Trickflow 240 heads for solid lift cam. Trickflow single plane intake.
Thanks for sharing! Strong numbers for sure.
 
Back
Top