73 barracuda rally dash wiring question.

[Flathead31coupe]

I was wondering if anyone was familiar with the rally - wiring, I've got a couple of connectors that I'm not sure where they go.\n The one yellow wire by itself comes from the light. That shines on the heater controls.
Then there's a red plug with a dark blue and light green single wire plug on each side of it. Then there is a black plug with 2 large dark green wires, a light green wire and a dark Brown wire.\nIt also has a lighter Brown single wire with it.By itself. Thanks.

 

[72RoadRunnerGTX]

 

[Flathead31coupe]

View attachment 146379

That helps out a lot, so it looks like mine is a non. A car, so the big red plug and the blue and green wire would not go to anything. And the plug that is next to the\nHeater control that has the pink wire coming from it.I do not have that one either.That must be something to do with AC.Maybe

 

[72RoadRunnerGTX]

That helps out a lot, so it looks like mine is a non. A car, so the big red plug and the blue and green wire would not go to anything. And the plug that is next to the\nHeater control that has the pink wire coming from it.I do not have that one either.That must be something to do with AC.Maybe

The A/C harness is separate from the main dash harness, if you don’t have A/C, should be able to remove it altogether.

 

[Flathead31coupe]

The A/C harness is separate from the main dash harness, if you don’t have A/C, should be able to remove it altogether.
View attachment 146381

Thanks.. Do you happen to have a picture of the whole dash like the first one you posted to thanks

 

[72RoadRunnerGTX]

 

[Flathead31coupe]

View attachment 146382View attachment 146383View attachment 146384View attachment 146385

Thanks

 

[Flathead31coupe]

Thanks

Any idea on this one

 

[72RoadRunnerGTX]

Any idea on this one

Part of the A/c harness, blower motor resistor pack.

 

[Flathead31coupe]

Part of the A/c harness, blower motor resistor pack.
View attachment 146393

Thanks sry I missed that.