833 or tremec T56 complete swap from auto to standard`

[cdummer43]

Looking to do a swap from my 727 to an A-833 (23 spline) or T56 which ever I can get my hands onto. So I need all the essential parts to make this happen. so far I have accumulated only a small block bell housing and inspection shield for this project. Any references to any parts would be greatly appreciated.

Yours Truly,

Cody

 

[Adrian Worman]

I would say that if you are on a budget then go with the New Process box and all factory linkage.
It could all be assembled with easy available used parts (except the clutch) and sourced from here or a salvage yard etc.
If you've got around 3 grand burning a hole in you're pocket then go the Keisler route

 

[rbbruno3]

Keisler is bankrupt ( I know they still owed me parts) SOL

 

[Avalanche]

Finding a good A833 would be your cheapest route. You can find most of what you need used. You can also buy a complete kit from either Brewers performance or Passion performance.

Passion alos is selling a direct bolt on tranny 5 speed. Probably at least a year on the wait list though.

http://www.brewersperformance.com/
http://www.passonperformance.com/

 

[cdummer43]

Just need to find those people selling some of the parts needed that are used...