• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

WTB WTB 1970 Cuda Parkin Lights

Status
Not open for further replies.

Snakedoctor

Active Member
Joined
Jan 24, 2022
Messages
31
Reaction score
15
Location
Rockton, IL
Rating - 0%
0   0   0
Contact seller
I'm looking for the parking lights that are placed on the upper part of the grill. looking for some nicer ones than I already have. They don't have to be perfect, just nice. Mine are a bit yellowed and have several of the typical hairline cracks. Located in Rockton, IL. I can come to you within a reasonable distance or happy to pay shipping.
 
Last edited:

pschlosser

Well-Known Member
Joined
Dec 8, 2022
Messages
549
Reaction score
182
Location
Santa Rosa, California
Rating - 0%
0   0   0
Just to clarify, are you looking for the round road lamps (often referred to as fog lamps and I sometimes see these in amber) sitting below the bumper, or the rectangular turn signal indicators (every one I've seen is yellow, but they flash with turn indicator and don't project much in the fog) recessed within the top of the grill?
1693261087533.png
 
Last edited:

EW1BH27

Well-Known Member
Joined
Dec 31, 2021
Messages
478
Reaction score
215
Location
Canada
Rating - 0%
0   0   0
The ones in the grille are sometimes called parking lights too, definitely not fog lights. You might want to edit your title
 

Snakedoctor

Active Member
Joined
Jan 24, 2022
Messages
31
Reaction score
15
Location
Rockton, IL
Rating - 0%
0   0   0
I need the ones that are on the upper part of the grill. The square lenses. I'll edit the title.
 

EW1BH27

Well-Known Member
Joined
Dec 31, 2021
Messages
478
Reaction score
215
Location
Canada
Rating - 0%
0   0   0

WDO72

Well-Known Member
Joined
Jan 8, 2020
Messages
188
Reaction score
60
Rating - 100%
1   0   0
Are you still in need of the parking lights? If so, I have a driver's quality set available for $300 plus shipping. They are OEM 70 cuda, and the outer lenses are clear, yet with the usual crazing and a couple long cracks each. I have a bunch of oem outer lenses, so I can give you the best of the lot. I can post photos if interested.
 

Snakedoctor

Active Member
Joined
Jan 24, 2022
Messages
31
Reaction score
15
Location
Rockton, IL
Rating - 0%
0   0   0
Are you still in need of the parking lights? If so, I have a driver's quality set available for $300 plus shipping. They are OEM 70 cuda, and the outer lenses are clear, yet with the usual crazing and a couple long cracks each. I have a bunch of oem outer lenses, so I can give you the best of the lot. I can post photos if interested.
Yes, some photos please? Where are you located? Any other Cuda stuff available?
 

WDO72

Well-Known Member
Joined
Jan 8, 2020
Messages
188
Reaction score
60
Rating - 100%
1   0   0
I'll take same photos of the lights and post them this weekend. At the moment, I'm in the middle of two restos. So, I won't have additional stuff available for some time. I'm located in Northern California.
 

WDO72

Well-Known Member
Joined
Jan 8, 2020
Messages
188
Reaction score
60
Rating - 100%
1   0   0
I have at least 4 complete sets of the '70 'cuda parking lights in various conditions. However, I've taken and posted photos of the best 3 outer lenses, as I believe that is what you are looking for. (There is 1 right lens and 2 left lenses in the photos) As is the case with most original lenses which were exposed to the elements, there is cracking. Please review the photos. I purchased 1 set of these recently with the understanding that they would buff out and would look great. That was not the case. What I didn't know at the time of purchase is that someone previously drilled two small holes to release trapped water at the lower bottom of the right lens and that both lenses were dirty, which did not show the extent of the cracks in the photos. (The holes are hard to see, but shown in the 4th photo) I've cleaned the lenses in the photos, yet they have not been buffed with acrylic polish. If you're interested, I'd sell one complete oem set for $250 + Shipping from Northern California. There is currently single light assemblies in poor condition on ebay for around $180 and a set of what seems to be OEM NOS for $1000. Repop sets from OER are around $300. So there are options depending upon the condition you're looking for. Good luck with your project.

20230927_122116.jpg


20230927_122126.jpg


20230927_122132.jpg


20230927_122143.jpg


20230927_122152.jpg


20230927_122159.jpg


20230927_122208.jpg


20230927_122213.jpg


20230927_122219.jpg
 
Status
Not open for further replies.
Back
Top