Ralph
Well-Known Member
- Joined
- Mar 5, 2013
- Messages
- 350
- Reaction score
- 71
I have a leak at the rear manifold bolt on the passenger side, all the other bolt heads are dry. Does that bolt go thru an oil passage and need some special compound ?
The manifold is an aluminum Edelbrock DP4B. See the photo.
Advice on how to proceed ?
Last of my leaks on a 5,000 mile motor. First was the oil pan but realize it was so beat up I installed a new one and the leak stopped - installed with the rubber windage tray combo which worked well. Second was the passenger valve cover which I finally sealed up. Small drop at the rear seal but leaving that as is for now.
Hopefully this is the last of the oil leak issues.
Thanks for your help.
The manifold is an aluminum Edelbrock DP4B. See the photo.
Advice on how to proceed ?
Last of my leaks on a 5,000 mile motor. First was the oil pan but realize it was so beat up I installed a new one and the leak stopped - installed with the rubber windage tray combo which worked well. Second was the passenger valve cover which I finally sealed up. Small drop at the rear seal but leaving that as is for now.
Hopefully this is the last of the oil leak issues.
Thanks for your help.