accessory on fuse block (70 Cuda')

[sharkycuda]

Hi guys,

I need your help!

I was working on my 70 Cuda', and I was checking the voltage at the accessory blade on the fuse blocks. This was with the key in the run position. I only read 10.6V on my volt meter. I believe it should read 12.5 +/- Volts.

Can anyone tell me what might be happening? Thanks in advance.

-Sharkycuda

 

[crackedback]

Bad wiring, bad connections at bulkhead are the most likely culprits

I won't start about the ammeter...

 

[challenger6pak]

I would look for corrosion at the bulkhead connectors.

 

[moparleo]

And a double Welcome aboard and welcome to the electrical world of Mopar's. Clean and cover with dielectric grease all electrical contacts both ground and hot.