K memeber difference?

[01freeman]

I want to know if a 6 cylinder K member will work with a 340. I have a K member from a 6 cylinder challenger and want to use it for my 340 challenger that needs one. If not what is the difference.
Thanks

 

[ramenth]

Difference? Mounts.

You can use that K if you want.

www.engine-swaps.com

Schumacher has kits that will allow you to bolt your 340 to that K. Put a bigger set of t-bars on it and you're good.

 

[74 challenger]

ramenth is right,i would get a new k-frame.They are cheap but you got to do what you can afford.

 

[01freeman]

here are some pictures of my K member in my car is it a 6 cylinder or V-8 K member

 

[DetMatt1]

I don't think there is a difference, it's all in the mounts.

 

[bad440]

Definitely a difference between 6 and 8, V8 does not mount to 6 cylinder K frame; one exception though if you purchase Schumaker mounts the V8 will bolt onto the 6 cylinder K frame, probably cheapest and easiest way to go.

 

[Chryco Psycho]

Your K frame is a V8 Freeman

 

[Chryco Psycho]

Definitely a difference between 6 and 8, V8 does not mount to 6 cylinder K frame; one exception though if you purchase Schumaker mounts the V8 will bolt onto the 6 cylinder K frame, probably cheapest and easiest way to go.

I agree , this info is correct