The New Guy

[Tech85]

Hello all,
Longtime reader of this forum and been a Mopar lover my entire life. I currently own a 72 Challenger I acquired about a year ago. It’s currently going through a full engine rebuild. Turning the 440 into a 512 stroker motor. Scat rotating assembly, trick flow heads, hydraulic roller cam, rpm dual plane intake and don’t kill me but I removed the three deuces in favor of a four barrel Holley 750

 

[Xcudame]

Welcome to FEBO from the desert! Nice 72 Challenger. Hope you have good brakes for the 512 stroker 440!

 

[Juan Veldez]

Hello all,
Longtime reader of this forum and been a Mopar lover my entire life. I currently own a 72 Challenger I acquired about a year ago. It’s currently going through a full engine rebuild. Turning the 440 into a 512 stroker motor. Scat rotating assembly, trick flow heads, hydraulic roller cam, rpm dual plane intake and don’t kill me but I removed the three deuces in favor of a four barrel Holley 750

View attachment 119824

View attachment 119825

View attachment 119826

Welcome to the show. Very nice looking Challenger.

 

[Rapidfire]

Welcome to FEBO. Nice to have you with us Great looking Challenger

 

[mrmopar340]

Waving from Virginia with a 73.
I like the 3 on the small block though.
You could and probably need a bit bigger carb. Even a stock 340 came with a 795 thermoquad.

 

[Chryco Psycho]

Welcome , I can't understand removing 3 2bbls & installing a tiny 750 , you are about 350 CFM short for a 512 "

 

[DetMatt1]

Welcome to the site from the Motor City!

 

[Tech85]

Welcome , I can't understand removing 3 2bbls & installing a tiny 750 , you are about 350 CFM short for a 512 "

I probably should have been a little more specific. Before the motor was pulled it had a 750 DP. The new motor I’m undecided on whether I want to go with an EFI or a 1050 brawler. I’m honestly leaning toward a EFI system. I understand EFI’s offer pretty much zero performance but this will be a street car. Just something to cruise around in on the weekends.

 

[Mopar Nut]

 

[Righty Tighty]

Welcome from Arizona! That's a beautiful car right there....I think we need a video so we can hear that 512 rumbling!

 

[Tech85]

Welcome from Arizona! That's a beautiful car right there....I think we need a video so we can hear that 512 rumbling!

lol , once I get it all back together I’ll be happy to post a video of it running.

 

[Challenger RTA]

Welcome to FEBO. Great color combination.

 

[Challenger RTA]

Welcome , I can't understand removing 3 2bbls & installing a tiny 750 , you are about 350 CFM short for a 512 "

I would think there could be lean conditions at higher RPM'S.

 

[moparlee]

Welcome to the site from Michigan!
That's a great looking '72 Challenger

 

[fasjac]

Welcome to the site from Arkansas!
Nice Challenger!